Models > ACF4265AW (PACF4265AW0)

ACF4265AW (PACF4265AW0) Amana Range - Overview

Get Parts and Repair Help for ACF4265AW

If you know the range repair part you need, you can browse the list of all parts on the ACF4265AW, or you can search by name or part description. You can also find your part by where it is located on the ACF4265AW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for ACF4265AW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

$68.70

Surface Ribbon Element with Limiter - Small

This is a 1500 watt surface element.

$2.77

Screw

Sold Individually.

$95.39

Dual Radiant Element with Limiter

With the dual element you are able to adjust the size of the burner you want to use to match your pots/pans.

$17.37

Main Power Terminal Block

$3.59

Appliance Scraper

Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.

$77.18

ELMNT-SURF

This is a 2000 watt / 240 volt surface element.

$5.00

SCREW

$64.18

Surface Ribbon Element with Limiter - Small

This is a 1200 watt / 240 volt surface element.

$56.00

Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

Common Symptoms of the ACF4265AW [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Outer Heater ring not working on dual burner.

  • Customer: Mark from Richardson, TX
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 21 of 23 people found this instruction helpful
Turned off power to unit.
Tilted up Glass top and removed two screws holding rear hinges to range. Then I unplugged wire harness from lower range and placed the Glass top facing down on counter top with towel for cushion. Removed 1 screw holding center of burner to support frame, two alignment screws on perimeter, and two screws holding support frame t... read more

Inner burner of dual burner element burned out

  • Customer: Don from Red Wing, MN
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 7 of 8 people found this instruction helpful
Pulled stove out and unplugged it (energized wire at burner even with burner turned off) Removed screws to lift cook top Removed burner support brace Removed three screws to remove burner Removed connections from old burner, installed on new burner Replaced screws in burner to brace Replaced burner brace Lowered cook top and installed screws Plugged ... read more

The burner was not heating up

  • Customer: Jeffrey from Miami Lakes, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 7 of 10 people found this instruction helpful
I removed only 3 screws that allowed me to lift the glass top on the stove. I removed the burner and I could see where it short circuited. I ordered the new burner element. After it arrived I replaced it by moving the wires from the old element to the new element, and put it back together.
I am sure that I saved at least $200 in "labor". read more