Models > ACF4255AB (PACF4255AB0)

ACF4255AB (PACF4255AB0) Amana Range - Overview

Get Parts and Repair Help for ACF4255AB

If you know the range repair part you need, you can browse the list of all parts on the ACF4255AB, or you can search by name or part description. You can also find your part by where it is located on the ACF4255AB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for ACF4255AB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$61.68

Surface Ribbon Element with Limiter - Small

This is a 1500 watt surface element.

$3.59

Appliance Scraper

Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper...

$4.46

Drawer Wheel

Also known as a roller.

$18.05

Rocker Switch

This switch is for the oven light and downdraft fan.

$11.63

Main Power Terminal Block

$3.83

SCREW

Shoulder Bolt - 10-32

$95.45

Dual Radiant Element with Limiter

With the dual element you are able to adjust the size of the burner you want to use to match your pots/pans.

$3.96

Indicator Lens - Orange

Common Symptoms of the ACF4255AB [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Outer Heater ring not working on dual burner.

  • Customer: Mark from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 13 of 15 people found this instruction helpful
Turned off power to unit.
Tilted up Glass top and removed two screws holding rear hinges to range. Then I unplugged wire harness from lower range and placed the Glass top facing down on counter top with towel for cushion. Removed 1 screw holding center of burner to support frame, two alignment screws on perimeter, and two screws holding support frame t... read more

Both fan and light switches were broken.

  • Customer: Peter from Media PA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 10 of 13 people found this instruction helpful
TURN OFF POWER TO RANGE AT FUSE BOX -- a)Open the oven door, b) Unscrew the left and right silver nuts (not the black screws)that are in the oven under the control panel, c)pull off the four control knobs on the control panel, d) gently tilt out the control panel, e) set the control panel in/on the protruding arms, f) pull off THE connectors at the back of t... read more

worn hinges, door would not stay closed

  • Customer: Miron from Boise ID
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 7 of 10 people found this instruction helpful
I just got on youtube, typed in "replacing hinges on an amana oven door" and an awesome video popped up. The job was a cinch. read more