Models > ACF422GAS (PACF422GAS0)

ACF422GAS (PACF422GAS0) Amana Range - Overview

Get Parts and Repair Help for ACF422GAS

If you know the range repair part you need, you can browse the list of all parts on the ACF422GAS, or you can search by name or part description. You can also find your part by where it is located on the ACF422GAS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for ACF422GAS parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$18.07

2 Piece Broiler Pan

$2.77

Screw - sold individually

$3.59

Appliance Scraper

Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.

$4.46

Drawer Wheel

Also known as a roller.

$11.63

Main Power Terminal Block

$3.83

SCREW

Shoulder Bolt - 10-32

$3.96

Indicator Lens - Orange

$78.26

ELMNT-SURF

Common Symptoms of the ACF422GAS [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The power had gone out and must have sent a surge that fried the ERC. I didn't know that but looked up the "F1" error code that was displayed on the screen online. Once I knew what part to replace it was easy. I just searched out the part on this site and ordered it. I ordered it on a Tuesday

  • Customer: Jeremy from Westmoreland NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 6 of 6 people found this instruction helpful
First I unplugged the unit. I removed 4 screws to remove the back plate. Removed 4 screws to remove the ERC unit. ( Plastic casing and all) Peeled the front cover off the old unit and stuck it on the new. Removed one wire at a time and plugged it into the new so I didn't mess up the wiring. screwed my 8 screws back in, plugged it in, and started cooking. read more

Loose terminal caused block to overheat and break

  • Customer: Dana from Black Mountain NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 5 of 8 people found this instruction helpful
Removed all terminals and block mounting screws. Repaired one burnt terminal and reassembled. Replacement part was an exact fit and reassembly whnet very well. read more

Replacing the bulb in the freezer side

  • Customer: Yafa (and David) from Bothell WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 4 of 5 people found this instruction helpful
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas. read more