Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ACF422GAC (PACF422GAC0)

ACF422GAC (PACF422GAC0) Amana Range - Overview

Get Parts and Repair Help for ACF422GAC

If you know the range repair part you need, you can browse the list of all parts on the ACF422GAC, or you can search by name or part description. You can also find your part by where it is located on the ACF422GAC by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for ACF422GAC parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$22.22

2 Piece Broiler Pan

The top of this part is now black.

$2.89

Screw (4)

Sold Individually.

$5.70

Appliance Scraper

Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.

$4.63

Drawer Wheel

Also known as a roller.

$101.45

Surface Element

This is a 2000 watt / 240 volt surface element.

$4.90

Screw

$17.72

Main Power Terminal Block

$4.90

Lock Indicator Light

$67.37

Surface Ribbon Element with Limiter - Small

This is a 1200 watt / 240 volt surface element.

Common Symptoms of the ACF422GAC

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The power had gone out and must have sent a surge that fried the ERC. I didn't know that but looked up the "F1" error code that was displayed on the screen online. Once I knew what part to replace it was easy. I just searched out the part on this site and ordered it. I ordered it on a Tuesday

  • Customer: Jeremy from Westmoreland, NY
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 9 of 9 people found this instruction helpful
First I unplugged the unit. I removed 4 screws to remove the back plate. Removed 4 screws to remove the ERC unit. ( Plastic casing and all) Peeled the front cover off the old unit and stuck it on the new. Removed one wire at a time and plugged it into the new so I didn't mess up the wiring. screwed my 8 screws back in, plugged it in, and started cooking. read more

Top oven door trim became discolored from oven heat. Made of white plastic. Had to renew the top trim.

  • Customer: e robert from ridley park, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 6 of 6 people found this instruction helpful
Opened the oven door, removed three screws holding trim to door, and removed trim piece.Installed new trim using the 3 screws. Looks good as new. Part was easy to find on Parts Direct using their illustrations of the Maytag stove.

Robert Hartman read more

F2 code on display and temperature climbing

  • Customer: Joel from Andover, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 8 of 12 people found this instruction helpful
1. Flip "OFF" circuit breaker.
2. Pull out range unit from wall.
3. Unplug range unit.
4. On the back of the range unit, remove 4 screws holding lower rear cover using a phillips head screwdriver.
5. Remove lower rear cover.
6. Unplug temperature sensor connector (1 wire connector located upper right section behind oven).
7. Fr... read more