All Installation Instructions for Whirlpool Air Conditioner ACE244XS1

A/C cooling but not cycling.

Unpluged unit from receptacle. Simply slid the unit forward a bit (to get to screws after removing face), removed four screws, pulled the wired sensor from front of grill. Reversed & replaced everything, plugged unit back in and turned on - all working well. Easy job.

Parts Used:

Thermostat

Dr H L from KIMBERLING CY, MO
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the old thermostat would not on an off

Removed old thermostat replaced it with a new thermostat.

Parts Used:

Thermostat

Donald W from GRANITE SHLS, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Both motor clips broken - >40 year old dryer!!

Removed the back - Saw the broken clips on the base of the dryer (the wires to the motor were pulling out because the motor was slipping).

Guessed that the parts were motor clips (no pix in the web site!)

Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of bike tire inner tube cut to fit for this.) Attached clips. Works fine!!

(Son is an engineer - he found the problem. Husband is a retired doctor - he couldn't!! but together they
supplied the muscle)
Sue (67 years old)

Parts Used: