Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ACC3660AW (PACC3660AW0)

ACC3660AW (PACC3660AW0) Amana Cooktop - Overview

Get Parts and Repair Help for ACC3660AW

If you know the cooktop repair part you need, you can browse the list of all parts on the ACC3660AW, or you can search by name or part description. You can also find your part by where it is located on the ACC3660AW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the ACC3660AW

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Spark Ignition Electrode

This spark ignition electrode is just over an inch in length. It comes with a mounting bracket and is used for some gas ranges and ovens.


Double Burner Bowl

This black double burner bowl is eighteen inches long and nine and a half inches wide.


Variable Fan Speed Control



Part might differ in appearance, but functions same as original. Sold individually.


Top Burner with Electrode - Medium - 9k


Bolt - m3x6

This electrode mounting screw is well under an inch long. It is made entirely of metal and has a Philips head.


Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.




Surface Burner Head

Sold individually.

Top Burner Knob

Sold individually. This knob accepts a D-shaped shaft.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken Electrode, no spark

  • Customer: HUY from ALISO VIEJO, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 42 of 51 people found this instruction helpful
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner read more

Burner would not ignite when control in "light" position

  • Customer: Michael from Friendswood, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 16 of 17 people found this instruction helpful
Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the electrode wire to the el... read more

Two of the four burners would not ignite when lighting the stove.

  • Customer: Dave from Livonia, MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 12 of 14 people found this instruction helpful
I thought the problem was with the ignitors/burners since they appeared to be worn. As it turned out, I needed the spark ignitor, which is a "brain box" located under the range cover. It connects all of the ignitor/burners and sends current to the ignitors to give it the "spark" to ignite the gas. It was really easy to replace. read more