Models > ACC3660AB (PACC3660AB0)

ACC3660AB (PACC3660AB0) Amana Cooktop - Overview

Get Parts and Repair Help for ACC3660AB

If you know the cooktop repair part you need, you can browse the list of all parts on the ACC3660AB, or you can search by name or part description. You can also find your part by where it is located on the ACC3660AB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the ACC3660AB [Viewing 3 of 3]


Spark Ignition Electrode

Sold Individually.


Top Burner Knob

Sold Individually. This knob accepts a D-shaped shaft.


Double Burner Bowl




Top Burner with Electrode - Medium - 9k




Burner Cap - 12/13K


Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.


Bolt - m3x6


Variable Fan Speed Control

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken Electrode, no spark

  • Customer: HUY from ALISO VIEJO CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 30 of 37 people found this instruction helpful
Remove 2 screws holding the top burner. Remove 1 screw holding the electrode. Remove electrode from wiring using plier. Install new electrode and top burner read more

Burner would not ignite when control in "light" position

  • Customer: Michael from Friendswood TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 12 of 13 people found this instruction helpful
Remove the two screws from the burner assembly (on top of the burner). Lift burner assembly from the cook top. Disconnect the electrode wire from the electrode. Remove the screw holding the electrode to the burner assembly (on bottom of burner). Install the new electrode and attach the electrode to the burner assembly. Attach the electrode wire to the el... read more

gas burner wouldn't light

  • Customer: David from Greenville NC
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 9 of 10 people found this instruction helpful
replaced top burner - in theory simple, but severe rusting of two screws holding the burner required drilling and extracting with a screw extractor. The screws broke requiring that the entire burner pan assembly be taken apart to remove the broken nubs of screws from behind with vice grips. Recommend that you have proper sized pan head screws available whe... read more