Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ABS300K1BB

ABS300K1BB General Electric Range - Overview

Get Parts and Repair Help for ABS300K1BB

If you know the range repair part you need, you can browse the list of all parts on the ABS300K1BB, or you can search by name or part description. You can also find your part by where it is located on the ABS300K1BB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for ABS300K1BB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the ABS300K1BB

[Viewing 3 of 3]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$68.62

Bake Element - Push On Terminals - 240V

The bake element is located on the bottom of the oven. If your oven will not heat properly it may be due to a faulty or damaged baking element. If you can see that the element has ...

Order within the next 1 hr and 45 mins and your part ships today!
$7.25

Burner Bowl - 8"

This part is located beneath the element and catches any spills.

Order within the next 1 hr and 45 mins and your part ships today!
$6.36

Burner Bowl - 6"

Order within the next 1 hr and 45 mins and your part ships today!
$13.33

Surface Burner Terminal Block Kit

This kit includes the female contact with wires, terminal block and mounting clip.

Order within the next 1 hr and 45 mins and your part ships today!
$14.40

Surface Burner Terminal Block Kit

Also known as receptacle.

Order within the next 1 hr and 45 mins and your part ships today!
$43.91

Oven Rack

The oven rack is sold individually. It is chrome in color and measures approximately 24 inches wide by 17-1/2 inches deep. The rack is used to hold cookware in the oven and slides back and forth for easy access. Racks can become rough and discolored over time and may need to be replaced, or perhaps you just need extra storage space in the oven! This repair is extremely simple and does not require any tools. Before you begin, ensure that the rack edges are straight and have not warped from shipment. Once the oven door is open, the stop end goes in first and it simply slides into place.

Order within the next 1 hr and 45 mins and your part ships today!
$52.27

Thermostat

This oven control thermostat is used in ranges to monitor and control the heat temperature. The thermostat turns the heat off and on to maintain the oven temperature that was set b...

Order within the next 1 hr and 45 mins and your part ships today!
$58.92

Broil Element - 240V

This broil element is found on the roof of the oven.

Order within the next 1 hr and 45 mins and your part ships today!
$2.87

Drawer Support

Order within the next 1 hr and 45 mins and your part ships today!
$1.63

Lens

Order within the next 1 hr and 45 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lower bake Element would not heat.

  • Customer: Ronald from Nassau, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 180 of 190 people found this instruction helpful
First I slid the stove out and unpluged it, then removed two screws,slid out element, disconected two wires, slid new element in to place, pluged two wires in ,put into place and installed two screws, pluged stove back in, and turned on to try. Works perfect. read more

The Bake-o-lite (Hard Plastic) block that holds the burners female connection in place had chipped away over time and wouldn't allow the male part of the burner to connect up correctly.

  • Customer: Robert from Mt. Vernon, IN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 103 of 105 people found this instruction helpful
After unplugging the range I took the rear sheet metal panel at the top off with a nut driver to expose the wiring connections. The next step was to remove the single screw holding the old part in place. (under the drip pan) Once free I snipped the old part from the wires and then taped the new female ends to the old wires with black electrical tape. From re... read more

Broken heating element

  • Customer: Paul from anna, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 57 of 60 people found this instruction helpful
1)Turn off power to stove
2)remove 2 bolts holding heating element
3)pull element out of the back of the oven about 8" so that the wire connects is visable
4)pull wire clips off of heating element and remove element from the oven
5)put wire clips on the new heating element
6)push new heating element back into the holes in the back of... read more