Quick Question!

Have you ever purchased from PartSelect.com before?

Models > A8720PA

A8720PA Admiral Cooktop - Overview

Get Parts and Repair Help for A8720PA

If you know the cooktop repair part you need, you can browse the list of all parts on the A8720PA, or you can search by name or part description. You can also find your part by where it is located on the A8720PA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for A8720PA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the A8720PA

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.90

Surface Burner Receptacle Kit

This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.

$7.16

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

BLOCK- TER

NUT- SWITC

GRIDDLE

COVER, GRIDDLE

INSERT

LIGHT, SIGNAL

Economy Y-frame Surface Unit - 6"

This electric range economy Y-frame surface element measures six inches and has four turns. It carries 1250 watts and is used on some electric ranges. The center medallion is black

$4.94

CONNECTOR-

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Drip bowls were burned and tacky

  • Customer: Donna from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 461 of 461 people found this instruction helpful
First I removed the old bowls and replaced them with the new. read more

Drip bowls needed to be replaced

  • Customer: John from Chester, VT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 447 of 528 people found this instruction helpful
took old bowls out, put new bowls in, took a coffee break read more

Stove top element not working due to bad receptacle.

  • Customer: Richard from Carthage, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 137 of 148 people found this instruction helpful
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to... read more