Models > A8200 > Parts

A8200 Maytag Washer - Parts

All parts for the Maytag Washer A8200

Below is a list of all parts for the Maytag Washer A8200 - Top Loading. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the A8200
1-14 of 198
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Water Inlet Valve

This part has two ports for water to enter. It is blue and is intended for use with many washing machines and comes with a multi-mount bracket and an outlet adaptor.


Mounting Stem/Tub Seal Kit

This kit comes with hub assembly, agitator seal and spanner nut. If your washer leaks once full (with or without clothes in it) or leaks during agitation, then you should replace the seal.


Drain Pump

This assembly uses 2 belts. Order belts if you notice wear and tear.


Rubber Injector Valve

This part is commonly known to cause a leak at the top left corner of the outer tub. It fits over the injector nozzle.



This screw is sold individually.


Hose Clamp



This screw is sold individually.


Tub Bearing Kit

This kit is used on 2-belt washers. It is recommended to change the seal kit at the same time.


Syphon Break Elbow Kit with Clamp

For drain hose 7/8".


Lid Switch Assembly

This black lid switch assembly comes complete with a bracket, two switches, and a fuse. An open fuse might indicate that the lid switch is bad. The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.


Damper Pad Kit

This damper pad kit is used for base support. It comes with three six inch damper pads, two little tubes of lubricant. NOTE: This part will need adhesive to stick it in place.


Plastic Injector Nozzle

This is the plastic nozzle for water injector tube.


Spring Retaining Clip

This front cover spring retaining clip is not quite an inch long. It is made entirely of metal and is used for some washing machines.


Adjustable Levelling Leg

Sold Individually. This adjustable leveling leg comes with a stop nut.

All Parts for the A8200
1-14 of 198