Models > A54FK-5TKXWM-R

A54FK-5TKXWM-R Admiral Oven - Overview

Get Parts and Repair Help for A54FK-5TKXWM-R

If you know the oven repair part you need, you can browse the list of all parts on the A54FK-5TKXWM-R, or you can search by name or part description. You can also find your part by where it is located on the A54FK-5TKXWM-R by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the A54FK-5TKXWM-R [Viewing 3 of 3]

$3.82

SCREW

$2.70

Screw

This screw is sold individually.

$17.55

Light Bulb - 120v 25w

$31.86

Hinge Kit - Left or Right Side

$3.82

Frame Screw

Sold Individually.

TAPE- FOAM

SEAL, HINGE SIDE

DIODE

MAGNETRON

MANUAL, USE & CARE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Light Bulb

  • Customer: Terri from Kingsland TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 8 people found this instruction helpful
Using a flat-head screw driver, I removed the 1 screw from the small "door" on the back, upper right corner. Once the screw was removed, it allowed the door plate to "pop" open; exposing the old bulb. I removed the old bulb; replaced it with the new one. DONE! read more

burnt out lightbulb for over 20 years

  • Customer: Kathtleen from Bristol CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
Unscrewed back plate, and replaced bulb read more

The oven door springs broke . Couldn't use oven because door wouldn't stay on.

  • Customer: helen from advance MO
  • Difficulty: Very Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers
  • 9 of 23 people found this instruction helpful
The new hinges couldn't be used because there were no threads where the screws go into the bracket! What should have been an easy job turned into a frustrating day. My husband would have had to try to find a tap & die set to thread it. We took the springs off and used our old hinges. Very, very frustrating. Our old bracket had been bent when the springs... read more