Models > A25CME > Parts

A25CME Maytag Washer - Parts

All parts for the Maytag Washer A25CME

Below is a list of all parts for the Maytag Washer A25CME - MAYTAG LAUNDRY (WASHER). To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the A25CME
1-14 of 253
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$13.71

Drive Belt

This rubber V-style drive belt drives a washer's transmission.

$16.64

Pump Belt

This V-style pump belt is typically used with washing machines that use two belts. This belt is about 40.5" long and 3/8" wide. This pump belt helps turn the pump and to help make the washer agitate properly. It is generally positioned between the motor and the pump.

$32.03

Water Inlet Valve

This part has two ports for water to enter. It is blue and is intended for use with many washing machines and comes with a multi-mount bracket and an outlet adaptor.

$65.19

Mounting Stem/Tub Seal Kit

This kit comes with hub assembly, seal and spanner nut. If your washer leaks once full (with or without clothes in it) or leaks during agitation, then you should replace the seal.

$9.06

Rubber Injector Valve

This part is commonly known to cause a leak at the top left corner of the outer tub. It fits over the injector nozzle.

$52.67

Drain Pump

This assembly uses 2 belts. Order belts if you notice wear and tear.

$2.70

Screw

This screw is sold individually.

$4.06

Plastic Injector Nozzle

$18.96

Dryer Door and Washer Lid Switch Kit

This kit is simple on/off mechanism that prohibits the machine from operating when the door is open.

$3.76

Adjustable Levelling Leg

Sold Individually. This adjustable leveling leg comes with a stop nut.

$2.70

Screw

This screw is sold individually.

$2.70

Hose Clamp

$32.43

Tub Bearing Kit

This kit is used on 2-belt washers. It is recommended to change the seal kit at the same time.

$33.45

Lid Switch Assembly

This black lid switch assembly comes complete with a bracket, two switches, and a fuse. An open fuse might indicate that the lid switch is bad. The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.

All Parts for the A25CME
1-14 of 253