Models > A25CA > Parts

A25CA Maytag Washer - Parts

All parts for models starting with A25CA

Below is a list of all Maytag Washer parts for the models starting with A25CA. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

Models starting with A25CA

All Parts for models starting with A25CA
1-14 of 219
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$22.75

Water Inlet Valve

This part has two ports for water to enter. It is blue and is intended for use with many washing machines and comes with a multi-mount bracket and an outlet adaptor.

$49.07

Mounting Stem/Tub Seal Kit

This kit comes with hub assembly, agitator seal and spanner nut. If your washer leaks once full (with or without clothes in it) or leaks during agitation, then you should replace the seal.

$2.71

Screw

This screw is sold individually.

$9.21

Rubber Injector Valve

This part is commonly known to cause a leak at the top left corner of the outer tub. It fits over the injector nozzle.

$36.04

Lid Switch Assembly

This black lid switch assembly comes complete with a bracket, two switches, and a fuse. An open fuse might indicate that the lid switch is bad. The point of the lid switch is for ...

$2.71

Hose Clamp

$47.77

Tub Bearing Kit

This kit is used on 2-belt washers. It is recommended to change the seal kit at the same time.

$78.88

Drain Pump

This assembly uses 2 belts. Order belts if you notice wear and tear.

$5.84

Rubber Foot Pad

This foot pad is made entirely of rubber and is gray in color. This pad is intended for use with washers and some dryers. Sold individually.

$7.73

Adjustable Levelling Leg

Sold Individually. This adjustable leveling leg comes with a stop nut.

$20.87

Damper Pad Kit

This damper pad kit is used for base support. It comes with three six inch damper pads, two little tubes of lubricant. NOTE: This part will need adhesive to stick it in place.

$7.96

Plastic Injector Nozzle

This is the plastic nozzle for water injector tube.

$18.68

Lid Check Switch

This is used to start your washer once the desired water level is reached.

$5.26

Lid Hinge Ball

These hinge balls are sold separately, though two are required per lid.

All Parts for models starting with A25CA
1-14 of 219