Models > A122B

A122B Jenn-Air Cooktop - Overview

Sections of the A122B

[Viewing 1 of 1]

Exact Part matches for your search term

[Viewing 1 of 1]
Radiant Smoothtop Cartridge Assembly – Part Number: A122BA
Radiant Smoothtop Cartridge Assembly
This part number matches the current model number A122B
PartSelect #: PS8768540
Manufacturer #: A122BA
Designer Line.
$496.53
  In Stock
Keep searches simple, eg. "belt" or "pump".
Cartridge Male Contact Spade – Part Number: Y708572
Cartridge Male Contact Spade
★★★★★
★★★★★
(1)
PartSelect #: PS1988157
Manufacturer #: Y708572
This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.
$13.95
  In Stock
Burner Cartridge Terminal Block – Part Number: WPY708730
Burner Cartridge Terminal Block
★★★★★
★★★★★
(3)
PartSelect #: PS11757594
Manufacturer #: WPY708730
No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.
$61.33
  In Stock
ELMNT-SURF – Part Number: W10823693
ELMNT-SURF
★★★★★
★★★★★
(2)
PartSelect #: PS11764903
Manufacturer #: W10823693
$197.50
  In Stock
Screw – Part Number: WP488234
Screw
PartSelect #: PS11742713
Manufacturer #: WP488234
This screw is sold individually. Size: 8-32 x 1/4 inch.
$9.13
  Special Order
Terminal Block Insulator – Part Number: 708834
Terminal Block Insulator
PartSelect #: PS1641107
Manufacturer #: 708834
This part fits inside your range's terminal block to act as an insulator for the contact spade.
$16.22
  Special Order
Cartridge Glass Top - Black – Part Number: WP5705M140-60
Cartridge Glass Top - Black
★★★★★
★★★★★
(2)
PartSelect #: PS11742944
Manufacturer #: WP5705M140-60
Glass ONLY.
  No Longer Available
ELMNT-SURF – Part Number: W10823702
ELMNT-SURF
★★★★★
★★★★★
(1)
PartSelect #: PS11764910
Manufacturer #: W10823702
$229.90
  In Stock
Element Support – Part Number: 71002205
Element Support
PartSelect #: PS2077653
Manufacturer #: 71002205
$8.08
  Special Order
CLIP – Part Number: Y708910
CLIP
PartSelect #: PS1988173
Manufacturer #: Y708910
This wiring clip is an inch long, and is made entirely of metal. This clip is used with ranges and cooktops.
  No Longer Available
USE WPL 5700M527-60 – Part Number: Y700648
USE WPL 5700M527-60
PartSelect #: PS2201265
Manufacturer #: Y700648
$31.45
  Special Order
SPADE   WI – Part Number: Y04100175
SPADE WI
PartSelect #: PS2195249
Manufacturer #: Y04100175
  No Longer Available
SUPPORT – Part Number: Y04100171
SUPPORT
PartSelect #: PS2195247
Manufacturer #: Y04100171
  No Longer Available

Questions And Answers for A122B

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Buddy
May 7, 2022
I cannot see a model number. The model nos. I have are e33658, e25378 and lr27211. I do know the cartridge (part number a122b) fits. Can you tell me what model number the a122b fits. I have one element in the cartridge that is not working. Swapping cartridges doesnt change the problem. It's the switch or wire from the switch to the cartridge plug. Thanks...................
For model number A122B
PartSelect logo
Hello Buddy, thank you for your question. There are several models listed on our site. You can see them under the Compatibility section. However, we believe the part you were looking for may be Cartridge Receptacle Terminal Wire Kit PS2201938. There is a photograph on our site as well. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the A122B

[Viewing 1 of 1]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
6" burner on the radiant surface started smoking and burned out.
Remove plug in unit from stove top. Turn over and remove the 7 screws from the 4 sides only. Turn back over holding unit together manually. Remove the glass top gently and lay it aside. Remove two wires that are plugged into the old unit, remembering which belongs where. You might want to remove one at a time and connect to new unit. Place new unit in between the three guides. Make sure the other unit is aligned also. Place glass top back unto unit and replace the 7 screws. Put unit back into stove top and test. Finished in less than 15 minutes with no issues.
Parts Used:
ELMNT-SURF
  • Johnny from Henderson, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
24 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The top would not heat,large or small eye.
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder.
Parts Used:
Burner Cartridge Terminal Block Cartridge Male Contact Spade Terminal Block Insulator
  • Calvin from Merced, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
27 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old Jenn--Air cook top inop. Model discontinued
Our Jenn-Air cook top is 25 years old. One can no longer order parts for this old of model. We ordered new SS burners as well as new Burner cartridge terminal blocks for a new and current model. They work perfectly. Took 10 minutes. $ 350 dollars verses $ 2600 for a new JennAir range plus instillation. Unit looks and works great. Plan to order new switches next.
Parts Used:
Burner Cartridge Terminal Block
  • Ronald from Avon, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
20 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!