Models > A121B

A121B Jenn-Air - Overview

Parts and Repair Help for models starting with A121B

If you know the repair part you need, you can browse the list of all parts for models starting with A121B, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your . Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with A121B

$3.76

Cartridge Male Contact Spade

This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.

$87.85

Radiant Surface Element with Limiter - 8"

$23.12

Burner Cartridge Terminal Block

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

$162.30

Cartridge Glass Top - Black

$3.82

SCREW

$4.60

Terminal Block Insulator

This part fits inside your range's terminal block to act as an insulator for the contact spade.

$3.82

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

$4.60

SCREW

CLIP

This wiring clip is an inch long, and is made entirely of metal. This clip is used with ranges and cooktops.

USE WPL 5700M527-60

Common Symptoms of models starting with A121B[Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The top would not heat,large or small eye.

  • Customer: Calvin from Merced CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 11 of 18 people found this instruction helpful
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder. read more

large element failed

  • Customer: Charles from Mamaroneck NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 9 of 19 people found this instruction helpful
Easy removal (lift and pull) of the the two element unit from the Jenn-air stove top. Placed unit right side up on a work surface. used a nut driver to remove 12 screws from the unit. removed the glass cook-top, revealing the two elements. Un-hooked two wires off the old damaged element, placed wires (plug and play) onto the new unit, then replaced the glas... read more

Broken glass top

  • Customer: Terrye from Pleasantville OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 7 people found this instruction helpful
Took about 10 minutes at the most. Unscrewed 6 screws. Took old top off screwed new top on. New top is a much better design. Amazed how fast we got it! The old glass was completely flat. Since I very rarely change out tops for my grill, I forgot which end the plug in was. I thought liquid had run under and the glass was just stuck. When I forced to hard (on... read more