Models > A121B-8

A121B-8 Jenn-Air - Overview

Get Parts and Repair Help for A121B-8

If you know the repair part you need, you can browse the list of all parts on the A121B-8, or you can search by name or part description. You can also find your part by where it is located on the A121B-8 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your . Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the A121B-8 [Viewing 1 of 1]

$3.76

Cartridge Male Contact Spade

This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.

$162.30

Cartridge Glass Top - Black

$28.21

Burner Cartridge Terminal Block

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

$4.60

SCREW

$4.60

Terminal Block Insulator

This part fits inside your range's terminal block to act as an insulator for the contact spade.

$3.83

SCREW

$2.70

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

CLIP

This wiring clip is an inch long, and is made entirely of metal. This clip is used with ranges and cooktops.

USE WPL 5700M527-60

ELEMENT, RADIANT (6""-

Common Symptoms of the A121B-8 [Viewing 1 of 133]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The top would not heat,large or small eye.

  • Customer: Calvin from Merced CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 9 of 15 people found this instruction helpful
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder. read more

cook top module would not heat.

  • Customer: Daryl from Olathe KS
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 4 of 4 people found this instruction helpful
The contact spades were burned from 10+ years of use and the cook top module was worn. I disassembled the module, taped the top to protect the creamic cook top, sanded the metal and spray painted to restore the original white finish. On the bottom half I replaced one missing pop rivet and cleaned and spray painted the bottom to restore to the original black.... read more

Broken glass top

  • Customer: Terrye from Pleasantville OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 7 people found this instruction helpful
Took about 10 minutes at the most. Unscrewed 6 screws. Took old top off screwed new top on. New top is a much better design. Amazed how fast we got it! The old glass was completely flat. Since I very rarely change out tops for my grill, I forgot which end the plug in was. I thought liquid had run under and the glass was just stuck. When I forced to hard (on... read more