Models > A120

A120 Maytag - Overview

Parts and Repair Help for models starting with A120

If you know the repair part you need, you can browse the list of all parts for models starting with A120, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your . Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with A120

Exact Part matches for your search term

[Viewing 1 of 1]

DISCONTINUED

This part number matches the current model number "A120".

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.75

Screw

This screw is sold individually.

$2.71

Screw

This screw is sold individually.

$4.90

Screw

This screw is sold individually.

$5.36

Cartridge Male Contact Spade

This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.

$5.17

Terminal Block Insulator

This part fits inside your range's terminal block to act as an insulator for the contact spade.

$4.61

SCREW

This screw is used with a refrigerator's icemaker assembly.

$20.10

Burner Cartridge Terminal Block

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

$4.95

SCREW

Sold individually.

$10.00

Silicone Adhesive

This adhesive is made specifically to attach dishwasher tine tips and door gaskets (when necessary).

$20.80

Diode

This part is also known as a rectifier.

Common Symptoms of models starting with A120

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The top would not heat,large or small eye.

  • Customer: Calvin from Merced, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 15 of 23 people found this instruction helpful
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder. read more

cook top module would not heat.

  • Customer: Daryl from Olathe, KS
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 7 of 8 people found this instruction helpful
The contact spades were burned from 10+ years of use and the cook top module was worn. I disassembled the module, taped the top to protect the creamic cook top, sanded the metal and spray painted to restore the original white finish. On the bottom half I replaced one missing pop rivet and cleaned and spray painted the bottom to restore to the original black.... read more

I spilled a pot of soup and shorted everything out had to replace these parts

  • Customer: William from York, PA
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 6 of 9 people found this instruction helpful
Pulled out the burners, Freed the outside rim and removed the burnerbox with the burnned out pieces removed tham and reassembled read more