Models > A120-8

A120-8 Jenn-Air Refrigerator - Overview

Get Parts and Repair Help for A120-8

If you know the refrigerator repair part you need, you can browse the list of all parts on the A120-8, or you can search by name or part description. You can also find your part by where it is located on the A120-8 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the A120-8 [Viewing 1 of 1]

$3.76

Cartridge Male Contact Spade

This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.

$28.21

Burner Cartridge Terminal Block

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

$4.60

SCREW

$4.60

Terminal Block Insulator

This part fits inside your range's terminal block to act as an insulator for the contact spade.

$3.83

SCREW

$2.70

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

$2.70

Screw

This band screw is sold individually.

CLIP

This wiring clip is an inch long, and is made entirely of metal. This clip is used with ranges and cooktops.

Glass and Rim Assembly - Black

This is NOT the complete cartridge.

USE WPL 5700M527-60

Common Symptoms of the A120-8 [Viewing 1 of 133]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The top would not heat,large or small eye.

  • Customer: Calvin from Merced CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 9 of 15 people found this instruction helpful
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder. read more

cook top module would not heat.

  • Customer: Daryl from Olathe KS
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 4 of 4 people found this instruction helpful
The contact spades were burned from 10+ years of use and the cook top module was worn. I disassembled the module, taped the top to protect the creamic cook top, sanded the metal and spray painted to restore the original white finish. On the bottom half I replaced one missing pop rivet and cleaned and spray painted the bottom to restore to the original black.... read more

Glass cracked from age, over 27 years

  • Customer: RON from SAN JOSE CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 4 of 5 people found this instruction helpful
Remove modular element from cooktop,place upright on bench and remove sheet metal screws. Lift glass/rim subassembly from modular heating unit (screwdriver may be required to carefully pry glass/rim assembly from heating unit) as it may be a tight fit. Inspect exposed heating unit for any noticeable damage, clean any debris resulting from cooking spills, e... read more