Quick Question!

Have you ever purchased from PartSelect.com before?

Models > A100L-C

A100L-C Jenn-Air Cooktop - Overview

Get Parts and Repair Help for A100L-C

If you know the cooktop repair part you need, you can browse the list of all parts on the A100L-C, or you can search by name or part description. You can also find your part by where it is located on the A100L-C by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for A100L-C parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the A100L-C

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.84

Surface Burner Receptacle Kit

This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.

Order within the next 4 hrs and your part ships today!
$27.58

Delta Frame Surface Unit - 8"

This 8 inch surface burner with reinforced delta frame carries 2100 watts and 240 volts. It has five turns and is compatible with many electric ranges. Its center medallion is all black in color.

Order within the next 4 hrs and your part ships today!
$7.99

Cartridge Male Contact Spade

This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.

Order within the next 4 hrs and your part ships today!
$22.81

Burner Cartridge Terminal Block

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

Order within the next 4 hrs and your part ships today!
$27.97

Delta Frame Surface Unit - 6"

This 6 inch surface burner with reinforced delta frame carries 1250 watts and 240 volts. It has four turns and is compatible with many electric ranges. Its center medallion is all ...

Order within the next 4 hrs and your part ships today!
$3.54

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

Order within the next 4 hrs and your part ships today!
$12.45

Terminal Block Insulator

This part fits inside your range's terminal block to act as an insulator for the contact spade.

Order within the next 4 hrs and your part ships today!
$2.78

Screw - 6-32 x 5/16

This screw is well under an inch long, and is made of metal.

Order within the next 4 hrs and your part ships today!
$4.79

Screw

Order within the next 4 hrs and your part ships today!

CLIP

This wiring clip is an inch long, and is made entirely of metal. This clip is used with ranges and cooktops.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Stove top element not working due to bad receptacle.

  • Customer: Richard from Carthage, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 146 of 157 people found this instruction helpful
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to... read more

The top would not heat,large or small eye.

  • Customer: Calvin from Merced, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 17 of 27 people found this instruction helpful
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder. read more

Old Jenn--Air cook top inop. Model discontinued

  • Customer: Ronald from Avon, CO
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 7 of 8 people found this instruction helpful
Our Jenn-Air cook top is 25 years old. One can no longer order parts for this old of model. We ordered new SS burners as well as new Burner cartridge terminal blocks for a new and current model. They work perfectly. Took 10 minutes. $ 350 dollars verses $ 2600 for a new JennAir range plus instillation. Unit looks and works great. Plan to order new switc... read more