Models > A100B Maytag

A100B Jenn-Air Cooktop - Overview

Get Parts and Repair Help for A100B

If you know the cooktop repair part you need, you can browse the list of all parts on the A100B, or you can search by name or part description. You can also find your part by where it is located on the A100B by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for A100B parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Exact Part matches for your search term [Viewing 1 of 1]

$226.12

Stove Cartridge Assembly

This part number matches the current model number "A100B".

Sections of the A100B [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$9.14

Surface Burner Receptacle Kit

This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.

Order within the next 10 hrs and your part ships today!
$7.58

Drip Bowl - 8"

NOTE: This part does NOT have two holes on the sides. This is a bad photo and the part is actually a chrome color.

Order within the next 10 hrs and your part ships today!
$7.12

Drip Bowl - 6"

Sold individually. This part is located beneath the element and catches any spills.

Order within the next 10 hrs and your part ships today!
$26.84

Surface Element - 8"

This burner with reinforced delta frame carries 2100W and 240V.

Order within the next 10 hrs and your part ships today!
$20.87

Electric Surface Element - 6"

This surface burner with reinforced delta frame carries 1250W and 240V.

Order within the next 10 hrs and your part ships today!
$5.30

Cartridge Male Contact Spade

This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.

Order within the next 10 hrs and your part ships today!
$21.54

Burner Cartridge Terminal Block

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

Order within the next 10 hrs and your part ships today!
$2.70

Screw - 6-32 x 5/16

Order within the next 10 hrs and your part ships today!
$4.05

SCREW

Order within the next 10 hrs and your part ships today!
$4.70

Terminal Block Insulator

This part fits inside your range's terminal block to act as an insulator for the contact spade.

Order within the next 10 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Stove top element not working due to bad receptacle.

  • Customer: Richard from Carthage NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 108 of 118 people found this instruction helpful
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to... read more

The top would not heat,large or small eye.

  • Customer: Calvin from Merced CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 14 of 21 people found this instruction helpful
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder. read more

no contact -burner male to female in unit.

  • Customer: Shalom from Brookfield CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 6 of 7 people found this instruction helpful
the replacement fit well. the burner is ok. if i need to change the female part receiving the prongs, what do i do?
or maybe there's another reason. [as, naturally one must pull it out to clean.] read more