Quick Question!

Have you ever purchased from PartSelect.com before?

Models > A100 Maytag

A100 Jenn-Air Cooktop - Overview

Get Parts and Repair Help for A100

If you know the cooktop repair part you need, you can browse the list of all parts on the A100, or you can search by name or part description. You can also find your part by where it is located on the A100 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for A100 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Exact Part matches for your search term

[Viewing 2 of 2]

ACCY, ELECTROL (1 PC)

This part number matches the current model number "A100".

$225.00

Stainless Coil Element Cartridge

This part number matches the current model number "A100".

This part has an end plug in.

Sections of the A100

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.84

Surface Burner Receptacle Kit

This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.

$7.83

Drip Bowl - Chrome - 8"

Sold individually.

$6.44

Drip Bowl - 6"

Sold individually. This part is located beneath the element and catches any spills.

$28.13

Delta Frame Surface Unit - 8"

This 8 inch surface burner with reinforced delta frame carries 2100 watts and 240 volts. It has five turns and is compatible with many electric ranges. Its center medallion is all black in color.

$28.74

Delta Frame Surface Unit - 6"

This 6 inch surface burner with reinforced delta frame carries 1250 watts and 240 volts. It has four turns and is compatible with many electric ranges. Its center medallion is all ...

$7.99

Cartridge Male Contact Spade

This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.

$23.14

Burner Cartridge Terminal Block

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

$95.63

Cartridge Top - Stainless Steel

This is just the top portion of the cartridge. All other parts sold separately.

$4.90

Terminal Block Insulator

This part fits inside your range's terminal block to act as an insulator for the contact spade.

$3.59

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Stove top element not working due to bad receptacle.

  • Customer: Richard from Carthage, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 139 of 150 people found this instruction helpful
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to... read more

The top would not heat,large or small eye.

  • Customer: Calvin from Merced, CA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 16 of 25 people found this instruction helpful
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder. read more

i needed a new top for my jenair

  • Customer: Judy from Florence, AL
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 11 of 16 people found this instruction helpful
i just ordered the part and replaced it with stainless steel. i am so glad the saleslady told me about it. my stove looks brand new. my drip pans look so nice with my new cover. read more