Models > 98-1668-00-02 > Instructions

98-1668-00-02 Tappan Freezer - Instructions

All installation instructions for 98-1668-00-02 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the freezer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 98-1668-00-02
1-15 of 21
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

replacement freezer keys

  • Customer: CHARLOTTE from SEDALIA MO
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 9 of 10 people found this instruction helpful
I accidently threw away both freezer keys to our upright Gibson and G.E. Freezers!!!! I had no luck finding replacements locally, so I got on the internet and came across PartSelect.com. I called them on the telephone; and after giving the model numbers of my freezers, the keys were on their way!! I received the keys very quickly and both worked perfectly. I would highly recommend Partselect.com. Charlotte M. Bishop

Freezer stopped freezing food.

  • Customer: FREDDIE from WHITAKERS NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 8 of 10 people found this instruction helpful
I unplugged electrical cord to the freezer. I removed the cover to the relay and load protector. I labeled the wires and made a diagram on the proper placement of each wire going to the relay. I unplugged each wire and removed the relay. Then I removed the load protector. I installed the new load protector and new relay. I placed the wires on the proper terminals of the relay. I replaced the electrical cover to the relay and load protector. I plugged the electrical cord back in the electrical outlet. My freezer started working again. I placed several bottles of water in the freezer to make sure the freezer was working properly before I restocked it with food.

Thanks again for the help. You just saved me about $400.

The freezer door wouldn't stay shut due to two irresponsible children.

  • Customer: Paul from Cape Coral FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 8 people found this instruction helpful
We ordered the part, which was a key, tied it on the freezer door handle, locked the door and voila, the problem was fixed. (We still have the children. :-)

BROKEN SLELF ENDS IN FREEZER

  • Customer: STEPHEN from CAMP VERDE AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 3 of 3 people found this instruction helpful
INSERTED END PIECES AND REMOUNTED OLD REFRIGERATOR BAR

Lost Locked Freezer Door Key

  • Customer: Robert from San Rafael CA
  • Difficulty: Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 2 people found this instruction helpful
Had to drag the full freezer out from the wall to expose the name plate, got the Model # and S/N and found the key on the partselect website in minutes. It was cheap so I got two. Other than FEDEX not knowing my address correctly, when I finally got the key it worked fine. Not a problem anymore.
Thanks

No instructions included

  • Customer: Beverly from Provo UT
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
Visual assessment and put in by hand.

broken pieces

  • Customer: D from Fairport NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
replaced them

Just lost key

  • Customer: Toni from Little Rock AR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
No repair. The key fit!

end cap broke

  • Customer: GEORGE from WEST LIBERTY OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
slid one end cap into slot and pulled into place. Put other end cap into cross bar and put other end of cross bar on to other end cap proceeded to put other end cap in to other slot in door and pulled into place. Job complete Job took less than three minutes.

Broken door shelf end brackets

  • Customer: RUDOLPH from PRINCETON TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Push-in replacement - easy. I must note that I received my order within two days - remarkable service from Part Select!

broken shelf end

  • Customer: Roger from Enfield NH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
snapped in the new shelf end and we were back in business. Thanks for the great & fast service RJL

I LOST THE KEY

  • Customer: VICKIE from DAWSON GA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 2 people found this instruction helpful
I ORDER ANOTHER ONE THANKS

COULD NOT LOCK

  • Customer: brenda from snellville GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 3 people found this instruction helpful
OH YEA THANX TO PARTSELECT IT WENT GREAT DIDNT GET FISRTKEY BUT WHEN GOT THE SECOND KEY IT WORKED GREAT THANX PARTSELECT

Broken door end cap.

  • Customer: Duane from Merrill MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 4 people found this instruction helpful
I was so supprised that Part slect was around and had the part . You can count on me to tell others about your wonderful service . I will see to it that I use your service when somthing else goes wrong with any of my appliences
Thanks again !

Plastic shelf supports broken

  • Customer: shari from west sand lake NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 1 of 8 people found this instruction helpful
Needed to remove both left and right broken (plastic) supports and reinsert the new parts. Not hard at all...worked like a charm!
All Instructions for the 98-1668-00-02
1-15 of 21