Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 958AF-CLZ

958AF-CLZ Admiral Range - Overview

Get Parts and Repair Help for 958AF-CLZ

If you know the range repair part you need, you can browse the list of all parts on the 958AF-CLZ, or you can search by name or part description. You can also find your part by where it is located on the 958AF-CLZ by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 958AF-CLZ parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 958AF-CLZ

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$8.84

Surface Burner Receptacle Kit

This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.

$56.76

Handle

This handle does not come with end caps. It is used to easily open or close the oven door or drawer.

$22.14

SWTCH-LITE

$4.53

RECEPTACLE

Broil Element (15" long x 12" wide)

This oven broil element with push on terminals can be used with some electric ranges or ovens. It comes with four screws and an instructions sheet. This element also has a terminal depth of three inches and a total element length of eighteen inches.

$25.30

Leveling Leg

Sold Individually.

$4.22

Hinge Pin

Sold individually.

Gasket - sold by the foot

This gasket is gray and is made of a spongy material. This gasket is used for many air conditioners. It will come to you at the length you specify: one foot, two feet, whatever you...

Burner Knob

Sold individually. This knob accepts a D shape shaft.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Drip bowls were burned and tacky

  • Customer: Donna from Dallas, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 461 of 461 people found this instruction helpful
First I removed the old bowls and replaced them with the new. read more

Drip bowls needed to be replaced

  • Customer: John from Chester, VT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 447 of 528 people found this instruction helpful
took old bowls out, put new bowls in, took a coffee break read more

Stove top element not working due to bad receptacle.

  • Customer: Richard from Carthage, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 138 of 149 people found this instruction helpful
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to... read more