Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 91195402000

91195402000 Kenmore Range - Overview

Get Parts and Repair Help for 91195402000

If you know the range repair part you need, you can browse the list of all parts on the 91195402000, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 91195402000 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$55.84

Broil Element

This broil element is found on the upper part of the oven cavity.

$32.86

Oven Rack

Sold individually.

$26.32

Surface Burner Switch - 6" - 1560W

This switch controls the small burner on a range/stove top.

$7.36

Foot - Leveller

Sold individually.

$7.03

Oven Light Socket - With Push In Receptacle

$14.00

Door Bottom Channel Trim - White

$2.06

Screw

This screw is sold individually.

$18.56

Broiler Pan - Large

This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain....

$3.29

Screw

Sold Individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Large burner would not get hot

  • Customer: Kevin from Leominster, MA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 59 of 74 people found this instruction helpful
Repair was very simple. Removed 2 screws under the cooktop, tilt the cooktop back, unplug 4 wires from 8" burner, remove two screws holding retaining clips, install new burner in reverse order. Very simple! read more

Broiler element failed

  • Customer: paul from west grove, PA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 53 of 58 people found this instruction helpful
repair took about 30minutes total tiem..first turn off power to stove..then open oven removed racks..used nut drive to loosen top two screw hold element..then remove screw hold temp sensor element...then removed two screws holding broiler element...then removed the top screw ...then pulled element out about 7 inches to expose wire connection..held on with sp... read more

Inner glass window of oven cracked

  • Customer: Charles from Sharon, MA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 48 of 51 people found this instruction helpful
1. Removed the oven door -- this is a little tricky -- you need to lift to small metal covers on the hinges, then pull the door up and out from the broil (half open position). Replace the door the same way. It is important to insert the hinges with the door in the "broil" position, and after verifying that the door is aligned and closes normally -- then li... read more