Models > 91193812300

91193812300 Kenmore Range - Overview

Get Parts and Repair Help for 91193812300

If you know the range repair part you need, you can browse the list of all parts on the 91193812300, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 91193812300 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

$56.00

Bake Element - Push On Terminals - 240V

This bake element is found on the bottom of the oven.

$12.11

Surface Burner Terminal Block Kit

This kit includes the female contact with wires, terminal block and mounting clip.

$12.82

Oven Sensor

This sensor detects the temperature within the oven cavity.

$20.93

Surface Burner Switch - 8" - 2500W

$4.48

Rear Drawer Support

This rear drawer support comes with the installation screw. ***NOTE: There has been a factory design change and you must change both rear supports from side to rear.

$51.29

Broil Element

This broil element is found on the upper part of the oven cavity.

$29.46

Oven Rack

Sold individually.

$1.93

Screw

This screw is sold individually.

$24.02

Surface Burner Switch - 6" - 1560W

This switch controls the small burner on a range/stove top.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bake Element burned out, bunt like a sparkler.

  • Customer: Brad from Bedford KY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 171 of 180 people found this instruction helpful
Ordered the part on Friday, got it on Saturday, very impressive. Be sure to unplug the range or disconnect the power at the breaker box before any repairs are started.

The lower (Bake) element is held in by 2 screws. Remove them and gently pull out the element to remove the power wires connected to the element. These wires are very short and ther... read more

The switches failed on both front burners.

  • Customer: Marc from Columbia NJ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 48 of 49 people found this instruction helpful
Remove nobs from both switches.
Pull out the range (the hardest part).
REMOVE THE POWER PLUG FROM THE WALL
Remove 7 screws with nut driver and take off upper back panel.
Remove 2 phillips screws from front, they hold the switch brackets.
The new switches don't fit in the bracket so discard the bracket keeping the screws.
Removin... read more

Bake Element fell apart

  • Customer: Ronald from Citrus Springs FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 39 of 42 people found this instruction helpful
Cut the Power! pull out stove remove the 4 screws in the back, disconnect the two wires from the element.Open oven door, remove racks and remove 2 screws holding the element in place. Replace element and the 2 retaining screws, replace racks.On the back of the oven connect the two wires and replace cover. Slide back in place and turn on the power. Done =) read more