Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 91193600010

91193600010 Kenmore Range - Overview

Get Parts and Repair Help for 91193600010

If you know the range repair part you need, you can browse the list of all parts on the 91193600010, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 91193600010 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.88

Light Bulb - 40W

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...

$7.42

Drip Bowl - 6"

This drip bowl, also known as the drip pan and burner bowl, is 6 inches in diameter and is used to catch spills from cooking on the top burner. If your bowls are getting stained, dirty, or rusted, then this replacement can solve it. First, remove the element from the top stove, then pull out the old drip pan. Set the new bowl and make sure it is aligned to where the element is plugged into. Lastly, you can put the element back in. For safety precautions, make sure to unplug the range from the power source and wait until the surface is cool before replacing this part.

$9.43

Drip Bowl - 8"

This drip bowl is sold individually. It is chrome in color and measures 10 inches in diameter at the widest point, with a hole in the middle. This is used to catch drippings and fo...

$13.33

Surface Burner Terminal Block Kit

This kit includes the female contact with wires, terminal block and mounting clip.

$22.98

Surface Burner Switch - 8" - 2500W

$10.48

Temperature Sensor

The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature inside your oven while it is on and send the temperature back up to the electronic control, which adjusts as necessary. If your oven is having difficulty achieving warmer temperatures and/or keeping warmer temperatures up, you may want to test your temperature sensor. Before you make this repair remember to unplug your range from the power source, and turn off the gas shut off valve.

$5.30

Rear Drawer Support

This rear drawer support comes with the installation screw. ***NOTE: There has been a factory design change and you must change both rear supports from side to rear.

$55.84

Broil Element

This broil element is found on the upper part of the oven cavity.

$32.86

Oven Rack

Sold individually.

$26.32

Surface Burner Switch - 6" - 1560W

This switch controls the small burner on a range/stove top.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Burner bowls needed replacement

  • Customer: Tom from North Prairie, WI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 475 of 481 people found this instruction helpful
Very easy repair, Pulled burner coil out, removed old burner bowl. Put in new burner bowl, plugged burner coil back in... easy as 1,2,3 read more

Burner Bowl Needed Replaced

  • Customer: Stephen from Knoxville, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 518 of 676 people found this instruction helpful
Removed burner element and put in bowl read more

Burned out block

  • Customer: Americus from Pittsburgh, PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 282 of 504 people found this instruction helpful
Watched a repairman do it the last time for $200.00. This time I unplugged the stove, unscrewed four screw nuts holding the upper rear cover, unplugged old wires, reconnected new ones, fed them thru to the front, attached them to the new block, screwed the block into place, replaced back cover, stuck the element into place, made my little brother plug it bac... read more