Models > 9119344190

9119344190 Kenmore Oven - Overview

Get Parts and Repair Help for 9119344190

If you know the oven repair part you need, you can browse the list of all parts on the 9119344190, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for 9119344190 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.82

Light Bulb - 40W

Sold individually.

$25.99

Bake Element

This partially open-style bake element comes with push-on terminals and is located on the bottom of the oven.

$4.27

Single Heating Element Support Clip

This metallic clip is used to help support the broil element. Sold individually.

$29.82

Hinge with Roller - Right Side

$45.50

Surface Burner Terminal Block Kit

This kit comes with the terminal block, mounting clip and wires.

$34.18

Hinge with Roller - Left Side

$16.87

Broiler Pan - Large

Includes the pan and grate.

$45.29

Broil Element - 240V

This element has push-on terminals.

$2.36

SCREW

Sold Individually.

$46.88

Surface Burner - 8" - 2100W

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven took 30 minutes to get to 380 degrees-no hotter

  • Customer: Sandra from Hayward CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 367 of 369 people found this instruction helpful
First I searched this site and read about the repairs - which made me feel like my husband could do it with ease. Then he removed two screws inside the oven, removed the broken element (didn't know it was broken til removed) and replaced the new one - just like that! The real key was being able to read how it was for other people who had already done it. ... read more

Bake element burned out

  • Customer: Laura from N. Little Rock AR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 185 of 251 people found this instruction helpful
I turned off the power to the oven at the breaker. Then I removed the two screws from the old element, pulled the old element out about 3 inches and disconnected the wires from the element and installed the new one. read more

Daughter dropped dish on element......broke it!

  • Customer: Danny from Trinity NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 71 of 72 people found this instruction helpful
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires
the repeated the process to complete the installation.
Relly easy. read more