Models > 91193391891

91193391891 Kenmore Range - Overview

Get Parts and Repair Help for 91193391891

If you know the range repair part you need, you can browse the list of all parts on the 91193391891, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 91193391891 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$22.05

Bake Element

This partially open-style bake element comes with push-on terminals and is located on the bottom of the oven.

$4.48

Single Heating Element Support Clip

This metallic clip is used to help support the broil element. Sold individually.

$99.32

Oven Sensor

This sensor detects the temperature within the oven cavity.

$5.55

Drip Bowl - 6"

$32.39

Surface Burner - 8" - 2100W

$5.98

Drip Bowl - 8"

$30.45

Hinge with Roller - Right Side

This hinge is located on each side of the oven door.

$36.09

Hinge with Roller - Left Side

This hinge is located on each side of the oven door

$4.09

Oven Bulb Lens Cover - Glass

$29.04

Rolled Terminal Surface Unit - 6" - 1250W

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bake element cracked on its own

  • Customer: Timothy from Cordova TN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 500 of 505 people found this instruction helpful
Flipped the breaker. Removed shelf, Find the right size nut socket, unscrew the two screws, pull the element out a little bit, disconnect the wires (on pretty tight), pull out element, clean out any mess in the oven, compare element with new one to make sure its the same size and such, connect wires to new element, replace screws, flip breaker back, tur... read more

Oven took 30 minutes to get to 380 degrees-no hotter

  • Customer: Sandra from Hayward CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 374 of 376 people found this instruction helpful
First I searched this site and read about the repairs - which made me feel like my husband could do it with ease. Then he removed two screws inside the oven, removed the broken element (didn't know it was broken til removed) and replaced the new one - just like that! The real key was being able to read how it was for other people who had already done it. ... read more

Oven tempature was approximately 150 degrees to low

  • Customer: James from Austin TX
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 167 of 192 people found this instruction helpful
This repair is EASY if you know how to use an ohm meter. If not, seek help for this step.

SYMPTOM:
The oven (JKP27WOP3WG or JKP27WP3WG and many ovens like it ) was not getting hot enough. Verifying the cooking temperature with an typical oven thermometer, I was able to determine that the oven was cooking temperature was about 150 degrees t... read more