Models > 9119250799

9119250799 Kenmore Range - Overview

Sections of the 9119250799

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Drip Bowl - 6 Inch – Part Number: WB31T10010
Drip Bowl - 6 Inch
★★★★★
★★★★★
(61)
PartSelect #: PS244394
Manufacturer #: WB31T10010
This drip bowl, also known as the drip pan or burner bowl, is 6 inches in internal diameter to match the burner, but actually measures closer to 8 inches in total diameter to its outer edges. This au...
$18.22
  In Stock
Drip Bowl - 8 Inch – Part Number: WB31T10011
Drip Bowl - 8 Inch
★★★★★
★★★★★
(63)
PartSelect #: PS244395
Manufacturer #: WB31T10011
This Drip Bowl, also known as a burner bowl or drip pan, is made to fit an element 8 inches in diameter and comes in chrome. The actual total diameter of this drip bowl is closer to 10 inches, but don...
$18.64
  In Stock
Bake Element - Push On Terminals - 240V – Part Number: WB44T10010
Bake Element - Push On Terminals - 240V
★★★★★
★★★★★
(115)
PartSelect #: PS249285
Manufacturer #: WB44T10010
This is an OEM bottom bake element for your oven. Make sure to wait until your oven is cool before replacing this part, and disconnect power to the oven. In order to replace this part, you will need t...
$103.03
  In Stock
Surface Burner Switch - 8 Inch - 2500W – Part Number: WB24T10025
Surface Burner Switch - 8 Inch - 2500W
★★★★★
★★★★★
(52)
PartSelect #: PS236750
Manufacturer #: WB24T10025
The 8-inch surface element switch is also known as an infinite heat switch, and is a part for your range. It controls the large surface element. It will turn the element on and off, and allow you to c...
$43.33
  In Stock
Broil Element – Part Number: WB44T10009
Broil Element
★★★★★
★★★★★
(24)
PartSelect #: PS249284
Manufacturer #: WB44T10009
This broil element is found on the upper part of the oven cavity.
$97.66
  In Stock
Range Surface Element Control Switch - 6 Inch - 1560 W – Part Number: WB24T10029
Range Surface Element Control Switch - 6 Inch - 1560 W
★★★★★
★★★★★
(18)
PartSelect #: PS236754
Manufacturer #: WB24T10029
This switch controls the small burner on a range/stove top.
$45.15
  In Stock
Oven Rack – Part Number: WB48T10063
Oven Rack
★★★★★
★★★★★
(23)
PartSelect #: PS2577619
Manufacturer #: WB48T10063
This is an authentic GE oven rack, sourced directly from the manufacturer. It is made of metal, and provides a stable surface for cookware inside the oven. If your current oven rack is damaged or miss...
$53.24
  In Stock
SCREW – Part Number: WB1K5062
SCREW
PartSelect #: PS234148
Manufacturer #: WB1K5062
$11.59
  In Stock
Screw – Part Number: WH2X930
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS271689
Manufacturer #: WH2X930
This screw is sold individually.
$12.22
  In Stock
Light Cover – Part Number: WB36X192
Light Cover
★★★★★
★★★★★
(8)
PartSelect #: PS247415
Manufacturer #: WB36X192
This light bulb lens covers the interior light bulb in an oven, range, or stove. No tools are necessary to replace this part. Simply slide off the wire bracket to remove the existing light bulb lens. ...
$13.53
  In Stock
Broiler Pan - Large – Part Number: WB48X10056
Broiler Pan - Large
★★★★★
★★★★★
(10)
PartSelect #: PS1517612
Manufacturer #: WB48X10056
This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain. The grate measures ...
$30.07
  In Stock
Front Drawer Support – Part Number: WB48T10013
Front Drawer Support
★★★★★
★★★★★
(1)
PartSelect #: PS249583
Manufacturer #: WB48T10013
$8.06
  In Stock

Questions And Answers for 9119250799

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 9119250799

[Viewing 7 of 7]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burner bowls needed replacement
Very easy repair, Pulled burner coil out, removed old burner bowl. Put in new burner bowl, plugged burner coil back in... easy as 1,2,3
Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch
  • Tom from North Prairie, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
484 of 501 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner Bowl Needed Replaced
Removed burner element and put in bowl
Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch
  • Stephen from Knoxville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
521 of 685 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake Element burned out, bunt like a sparkler.
Ordered the part on Friday, got it on Saturday, very impressive. Be sure to unplug the range or disconnect the power at the breaker box before any repairs are started.

The lower (Bake) element is held in by 2 screws. Remove them and gently pull out the element to remove the power wires connected to the element. These wires are very short and there is not much room in which to work. After having removed the wire connectors one slipped from my fingers and went back in the small opening in the back of the oven where the element is inserted. It took some time to fish out the wire. Not wanting to slide out the range I used some surgical forcepts I happen to have grab the wire ( handy to clip wires or compontents in place for some delicate repairs). Its all blind and the opening is very small plus the insulation must be pushed back to gain access. Anyway I managed to grab the wire, attached both wires to the element, replaced the plate and screws holding the element in place, all finished. Worked great. Other ranges I have owned provided a socket to plug in the element, I guess the bottom line gets in the way of quality.. Being 60 years old the worst part of this job is the getting down on my knees to do the work and getting back up again.
Parts Used:
Bake Element - Push On Terminals - 240V
  • Brad from Bedford, KY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
345 of 369 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!