Models > 9114368413

9114368413 Kenmore Cooktop - Overview

Get Parts and Repair Help for 9114368413

If you know the cooktop repair part you need, you can browse the list of all parts on the 9114368413, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for 9114368413 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.98

Drip Bowl - 8"

Sold individually. This part is located beneath the element and catches any spills.

Order within the next 1 hr and 39 mins and your part ships today!
$7.48

Drip Bowl - 6"

This six inch chrome drip bowl is intended for use with rolled terminal style plug in surface element units.

Order within the next 1 hr and 39 mins and your part ships today!
$24.05

Infinite Switch Kit

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

Order within the next 1 hr and 39 mins and your part ships today!
$48.25

Surface Burner Terminal Block Kit

This kit comes with the terminal block, mounting clip and wires.

Order within the next 1 hr and 39 mins and your part ships today!
$3.00

Screw

Sold Individually.

Order within the next 1 hr and 39 mins and your part ships today!
$36.76

IND LIGHT

Order within the next 1 hr and 39 mins and your part ships today!
$24.98

KNOB-INF

Order within the next 1 hr and 39 mins and your part ships today!
$5.55

MEDALLION

Order within the next 1 hr and 39 mins and your part ships today!

"6"" TRIM RING "

$4.70

"8"" TRIM RING "

Order within the next 1 hr and 39 mins and your part ships today!

Common Symptoms of the 9114368413 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

There was no heat on the coils.

  • Customer: Shaohui from East Lansing MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers
  • 25 of 28 people found this instruction helpful
I opened the lid, and found that the terminal blocks were burnt, the wires were melted. I ordered one set of terminal block to replace the burnt one, and it worked. Before I started, I shut off the electricity in the whole house to be safe. read more

Surface burner coil did not work.

  • Customer: Gregory from Mont Belvieu TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 16 of 22 people found this instruction helpful
TURN OFF ALL POWER TO KITCHEN. Took off all burner coils and plates below them. Lift hood. Locate part. Remove old part and replace with new part in same way as was previously installed. The wire that comes with the kit is actually too much wire, but just arrange it the best you can and leave it....no big deal. I didn't have a magnet, but needed one. T... read more

Have tried 3 different store-bought drip pan sets over the past year. None of them laid flat.

  • Customer: Jennifer from Saginaw MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 11 people found this instruction helpful
Simple installation of new pans and all are level! Thank heaven! Thank you, PartSelect! read more