Models > 9114264591

9114264591 Kenmore Cooktop - Overview

Get Parts and Repair Help for 9114264591

If you know the cooktop repair part you need, you can browse the list of all parts on the 9114264591, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.62

Secure Down Bracket

$77.96

Surface Element Switch - 1900W

$2.79

SCREW-10AB

$3.00

WASHER

$7.68

CLEANER

$6.24

Razor Scraper

This is sometimes used to clean glass stovetops.

$92.27

Large Dual Element - 2500W

This dual element can be changed to be used as either a small or large burner. It comes with the element limit switch.

$76.45

Surface Burner Switch - 6"- 1200W

$16.66

Switch Seal

This part goes between the infinite switch (under the cooktop) and the knob.

$9.82

INFINIT KNOB

Common Symptoms of the 9114264591 [Viewing 1 of 29]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Intermitently the switch would stick on high.

  • Customer: Larry from Mattawa WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 8 people found this instruction helpful
Pulled unit from the counter top, removed all side screws holding the top on and set the top off. Removed switch mount section, Identified the terminal wire locations. I then removed the old switch and connected the wires per my diagram. Returned all screws, tested the burner for opeation and reset the cooktop back into the counter hole and secured. read more

Right front heating element was not working

  • Customer: Eugene from Hilton Head SC
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench(Adjustable)
  • 4 of 8 people found this instruction helpful
First removed the back of range, then the metal vent section that prevented the range top from lifting up. There are 2 screws accessable only after you open the oven door that need to be removed before you can lift up the glass top. Then remove the bracket holding the 2 front heating elements. Made a diagram of all wires going to and from the large 2 eleme... read more

Outer element not working

  • Customer: Richard from Hampton NH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Cooktop lifted out without the need to remove any fastening of any kind. Slid two 2X2 sticks under top to have access to screws around perimeter. After removing all screws I lifted the glass top from base. I did all of this before I placed the order to make sure that I was ordering the correct element. Good thing that I did that because there are two similar... read more