Codes are found in instruction manual taped to inside of oven by control panel. A code F7 is stickey touch panel.
Removed three screws holding panel, pushed back wire clip for cable plug in, remove wires, unscrewed control module from panel, put in new, reverse order to install.
Much cheaper than $800.00 the repairm
... Read morean wanted!
Removed three screws from under control panel, which holds it in place. Carefully removed the panel from the oven. Very carefully removed the power strip block which connects the control panel to the control box. Remove the four screws from the control box. Than replaces the old control box to the new control panel and attache the n
... Read moreew power strip to control box. And put it all back together. May sounds confusing but, it's easy. You'll see, you can do it!
