Models
>
9113378812
9113378812 Kenmore Cooktop - Overview
Sections of the 9113378812
[Viewing 3 of 3]Keep searches simple, eg. "belt" or "pump".
Burner Bowl Seal
PartSelect #: PS244608
Manufacturer #: WB32M8
This part is the replacement burner bowl seal or drip pan seal for your range. It is black in color and is sold individually. The burner bowl seal creates a seal between the cooktop and the drip pan a...
$28.25
In Stock
Ignitor Mounting Screw
PartSelect #: PS234519
Manufacturer #: WB1X1293
Sold Individually.
$9.64
In Stock
Burner Bowl Seal
PartSelect #: PS244599
Manufacturer #: WB32M10
This gasket goes under the burner bowl to help protect the glass from high heat. Sold individually.
No Longer Available
Gas Pressure Regulator
PartSelect #: PS2337785
Manufacturer #: WB19T10078
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane.
This valve automatically cuts off the flow of gas at a certain pressure.
$54.42
In Stock
Large Burner Drip Bowl
PartSelect #: PS244366
Manufacturer #: WB31M11
This part is sold individually. It is white on the top side, and black underneath. Used for gas ranges. You may need to order the drip bowl seal.
No Longer Available
Small Burner Drip Bowl
PartSelect #: PS244365
Manufacturer #: WB31M10
This part is sold individually. It is white on the top side, and black underneath.
No Longer Available
Large Burner Trim Ring
PartSelect #: PS256025
Manufacturer #: WB7M8
This trim ring is white on the top side and black underneath.
$31.37
Special Order
Small Burner Trim Ring
PartSelect #: PS256026
Manufacturer #: WB7M9
This trim ring is white on the top side and black underneath.
No Longer Available
Questions And Answers for 9113378812
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 9113378812
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drip pans needed to be replaced.
Simiple repair. Determined drip pan size (sm, med., lg.) removed 2 screws holding drip pan, placed gasket around new drip pan and installed. Repaired took less than 5 minutes.
Parts Used:
-
Steve from Broken Arrow, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
18 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large and small Burner Drip Bowls needed to be replaced
The drip bowls of my stove had to be replaced. The tough job about this is that the bowls need to be ordered which we did. The order was sent to my house within a couple days. The drip bowls were replaced and they look and work just fine. The gas stove is about 10 yrs old and it needs the parts special ordered now. I used to wash and use
... Read more
a bit of elbow grease but this time it required too much effort. So an easy replacement did the trick.
Read less
Parts Used:
-
Nelda from Carmichael, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers, Socket set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Porcelain chipped around screws
Removed old rusted screws, removed old drip bowls, removed seals from old drip bowls carefully cleaned seals and replaced them on the new drip bowls. I re-installed the new drip bowls with new stainless steel screws. ( be careful not to tighten the screws to tight )
Parts Used:
-
John T from Cypress, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!