Models > 87899

87899 Accutemp Cooktop - Overview

Get Parts and Repair Help for 87899

If you know the cooktop repair part you need, you can browse the list of all parts on the 87899, or you can search by name or part description. You can also find your part by where it is located on the 87899 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Exact Part matches for your search term [Viewing 1 of 1]

SEALING

This part number matches the current model number "87899".

Sections of the 87899 [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$5.30

Cartridge Male Contact Spade

This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.

Order within the next 11 hrs and your part ships today!
$21.54

Burner Cartridge Terminal Block

No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.

Order within the next 11 hrs and your part ships today!
$4.70

SCREW

Order within the next 11 hrs and your part ships today!
$4.70

Terminal Block Insulator

This part fits inside your range's terminal block to act as an insulator for the contact spade.

Order within the next 11 hrs and your part ships today!
$5.29

Speed Nut

Order within the next 11 hrs and your part ships today!
$5.74

SCREW

Sold individually.

Order within the next 11 hrs and your part ships today!
$3.36

Screw

This screw is sold individually. Size: 8-32 x 1/4 inch.

Order within the next 11 hrs and your part ships today!

CLIP

This wiring clip is an inch long, and is made entirely of metal. This clip is used with ranges and cooktops.

BURNER 6

BURNER ELEMENT 240V

Common Symptoms of the 87899 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The top would not heat,large or small eye.

  • Customer: Calvin from Merced CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 14 of 21 people found this instruction helpful
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder. read more

cook top module would not heat.

  • Customer: Daryl from Olathe KS
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 6 of 7 people found this instruction helpful
The contact spades were burned from 10+ years of use and the cook top module was worn. I disassembled the module, taped the top to protect the creamic cook top, sanded the metal and spray painted to restore the original white finish. On the bottom half I replaced one missing pop rivet and cleaned and spray painted the bottom to restore to the original black.... read more

I spilled a pot of soup and shorted everything out had to replace these parts

  • Customer: William from York PA
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 5 of 8 people found this instruction helpful
Pulled out the burners, Freed the outside rim and removed the burnerbox with the burnned out pieces removed tham and reassembled read more