Models > 8264X4

8264X4 ((2000)) Cub Cadet Snow Blower - Overview

Sections of the 8264X4

[Viewing 1 of 1]
Diagram and Parts List for (2000) Cub Cadet Snow Blower
Keep searches simple, eg. "belt" or "pump".
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
TT Screw 1/4-20 x 0.5
PartSelect #: PS9298768
Manufacturer #: 710-0599
$4.99
  In Stock
Drive Clutch Cable 39.88 – Part Number: 946-0898
Drive Clutch Cable 39.88
PartSelect #: PS9170572
Manufacturer #: 946-0898
$26.74
  In Stock
Auger Clutch Cable – Part Number: 946-0897
Auger Clutch Cable
PartSelect #: PS9170571
Manufacturer #: 946-0897
$25.23
  In Stock
Hex Flange Bearing – Part Number: 941-0245
Hex Flange Bearing
PartSelect #: PS9178250
Manufacturer #: 941-0245
Used mainly in snow blowers, this flange bearing is typically installed on the axle and creates a tight fit with little friction while still allowing for movement.?Your equipment will likely feature m...
$9.91
  In Stock
Worm Gear 20 T, 22" – Part Number: 917-04861
Worm Gear 20 T, 22"
PartSelect #: PS9165943
Manufacturer #: 917-04861
This is a worm gear that is designed for use within a variety of snowblowers and snowblower tractor attachments. The worm gear is used to rotate the auger through the drive mechanism, also known as th...
$41.34
  In Stock
Spring-Extension – Part Number: 932-0264
Spring-Extension
★★★★★
★★★★★
(1)
PartSelect #: PS9310931
Manufacturer #: 932-0264
This is a genuine OEM sourced part that is not part of a kit or assembly and is sold individually. This Spring Extension, or Extension Spring, serves a variety of purposes, depending on your model. It...
$4.99
  In Stock
Washer-Lock 5/16 – Part Number: 936-0119
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.99
  In Stock
Spring-Extension – Part Number: 932-0611
Spring-Extension
PartSelect #: PS9163468
Manufacturer #: 932-0611
An extension spring is designed to add tension and resistance to different components throughout lawn and garden equipment. This extension spring, also known as an idler spring, is designed for use wi...
$7.56
  In Stock
Bearing-Flange – Part Number: 941-0598
Bearing-Flange
PartSelect #: PS9166232
Manufacturer #: 941-0598
This metal flange bearing is an authentic manufacturer-sourced component which is designed for use in lawn and garden outdoor equipment. It is bronze in color, with 6 six flat sides, and it has an inn...
$13.03
  In Stock
Extension Spring – Part Number: 932-0710
Extension Spring
PartSelect #: PS9163399
Manufacturer #: 932-0710
$7.56
  In Stock
Hex L-Nut 5/16-18 Thd. – Part Number: 912-0429
Hex L-Nut 5/16-18 Thd.
PartSelect #: PS9164534
Manufacturer #: 912-0429
$3.08
  Special Order
Shave Plate 26" – Part Number: 790-00121-0637
Shave Plate 26"
PartSelect #: PS9306314
Manufacturer #: 790-00121-0637
$37.67
  In Stock
View More
Back to Top

Questions And Answers for 8264X4

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Original shave plate badly worn
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, apply heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Read less
Parts Used:
Shave Plate 26&#34
  • John from HARRISVILLE, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench set
4 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top