Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Howard W - October 11, 2018
Verified Purchase
Timer knob looked original
The part was delivered in 48 hours. Really appreciated. Simple to install with no problems.
★★★★★
★★★★★
Chris F - February 2, 2018
Verified Purchase
Mymaytag
Partselect works for me! !!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace broken timer knob
Open washer console by sliding your hand inside over the drum. There are two clips at each corner of the console. There are videos that show you how. The right clip is freely accessible. Reach behind a notch to get to the left clip. Squeeze clips to release.
Once console is open, use pliers to pull the knob shaft from inside t
... Read morehe console. This will release the old knob. Attach new knob and secure the console.
Read less
Eng Yew from Dublin, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
timer knob broken from support at base
with pliers removed remaining broken part on selector switch attached new knob sliding fool proof groves on innerside now we are back in business, myself and family thank you for the support
RISHIE from LITTLE FALLS, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
12 of 21 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Denny
November 24, 2017
How do i change the timer knob wpw10110033.Knob turns but selected ring does not.
For model number mtw5870tw0
Hi Denny, Thank you for the question. The knob and ring are sold sepratly. If the ring is the part you need to replace, you need to order PartSelect Number PS1491194. In order to remove the knob to replace the ring you will need to remove the back of the control panel to access the back of the timer switch. On the back of the switch you will see a small pin. Using a pair of pliers you need to pull the pin out and release the knob.Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
February 21, 2018
The knob turns but the selector ring does not on the timer so what part do i need?
For model number MTW5800TW0
Hi Gary,
Thank you for your question. You will have to inspect the parts to determine which one is broken. You will have to look at your timer dial, your timer knob, and your timer itself. The part on your timer you need to look at would be the stem and make sure it is not physically broken. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
