7GU2300XTVS0 Whirlpool Dishwasher - Instructions

Ordered Rinse Aid Cap and received the next day. Placed in the dishwasher Rinse Aid Cap position and locked in. A perfect fit.

Checked to see if top spinner was clogged. All ok. Wanted to see if water was flowing from bottom. Checked a video to see how to remove parts to access lower area. Saw the problem immediatley. Clogged Chopper screen due to broken chopper blade. Ordered new chopper assembly and got it in two days. Five minuted to install. Washer works like new.

Unhook electrical/water supply, removed dishwasher, flip upside down, Remove wire connector from motor, remove bolt from motor, turn motor and remove, install new motor in reverse process.

Pulled Dishwasher out, turned off power. Did not have to disconnect any hoses or electrical, because when I did the original installation, I left plenty of slack, so as to be able to pull it out. Next, tipped it on it's side, unplugged the harness, undid the bolt, turned motor 1/4 turn, pulled it out. To, re-install, just reversed the process. About 1 hour.Followed Excellent instructions on video. Was very impressed with delivery time. Only about 30 hours, from the time I ordered, to receiving part. Reg. ground.

Estamated time was 15 minutes, it took me about 3 hours because everything was so cake up with detergent. Parts would not move. Video very helpful

after putting detergent dispenser in we started up the maching and it leaked all over the floor. took it back apart and checked the rubber gasket on dispenser. it looked good, not damaged. not wanting to get the floor wet and not knowing why it leaked i put form-a-gasket on the rubber seal and put it back together.. no more leaks..the screws where as tight as i dared to do with out stripping out the plastic so thats why i used form-a-gasket.

Ordered the gasket on line. Received gasket in 3 days. Removed old gasket by pulling out in one piece. Pressed the new one in with my fingers and it fit perfectly and now have no leaks. Very easy fix.

Pulled out, put on it's side. Take pump off and put new one on and put all back together. Very easy. Video was helpful also.

The service video was great. This is a great product web site and service.... Thank you

put new one in

cap was replaced

I watched the Video that was supplyed with the e-mail and when the part got here I new just what to do and it took maybe 15 min at the most. You saved me over $100.00 from what we had to pay once before for the same problem to a repair man. And now I know where to buy my parts for all my appliances when they fail and with KitchenAid it seems to be quite often.

Old gasket was broken in places and old. Installing the new one was easy- no tools required. Just pull out the old one and press in the new one. Washer still leaks because door does not close all the way- need to figure out how to get it to shut tight. Maybe the latch is loose or worn.

Followed the video and changed it out in 20 minutes which did not fix the problem entirely, but I went back to the list of symptoms and watched a video on exchanging the Chopper assembly. I disassembled the interior and found broken glass and wire and string restricting the rotational functions. No replacment was necssary here, but a good cleaning was in order. This made it run like new and the glasses came out shiny again. These step by step videos have even made me think about becoming an appliance repairman. LOL! This is about the 8th time I have had success with Part Select. I have had no failures. Thank you for giving away all the secrets. YOU DEFINITELY HAVE SAVED ME AND MY FAMILY TONS OF MONEY!

turned off water supply, removed front lower cover, disconnected main water feed, removed retaining screw, removed fill valve assembly, disconnected electrical connector, removed flex line from valve to dishwasher. Reverse order for installation of new valve