Models > 79692198900

79692198900 Kenmore Dryer - Overview

Get Parts and Repair Help for 79692198900

If you know the dryer repair part you need, you can browse the list of all parts on the 79692198900, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$21.75

Drum Support Roller

This part is used to hold the drum in place in the cabinet while letting the drum rotate on the support rollers. It is recommended that you replace both rollers at once. Sold Indiv...

$22.86

Lint Filter

NOTE: As per manufacture - due to a redesign you must also change the cover and filter guide.

$10.52

Thermistor,NTC

$4.59

Thermostat

$3.05

Sensor

$22.86

Poly-V Drive Belt

$20.07

Cover,Guide

$10.52

Thermostat

$8.18

Guide,Filter

$8.18

Thermostat Assembly

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Gas Dryer not getting hot

  • Customer: Terry from Goose Creek SC
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 9 of 12 people found this instruction helpful
I noticed the flame would start, then quit after about 15 seconds. I checked the flame detector, and found the lenze cracked. I replaced it, and it's as good as gold.

It looked like a hard job to take the drum out to get at the part. But the top was off with 3 screws, the front about 6 I think. Then the front frame, only 4 screws. I think sett... read more

Filter parts chipped - replaced

  • Customer: David from Annapolis MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 5 people found this instruction helpful
Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw. read more

Dryer quit spinning

  • Customer: Peggy from San Bernardino CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
One of the roller assembly froze up & had a flat spot on it. There for causing the drum not to rotate. Pulled it out replaced the roller & up & running. read more