Models > 79691722010

79691722010 Kenmore Dishwasher - Overview

Get Parts and Repair Help for 79691722010

If you know the dishwasher repair part you need, you can browse the list of all parts on the 79691722010, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$21.75

ROLLER ASSEMBLY

$22.86

Lint Filter

NOTE: As per manufacture - due to a redesign you must also change the cover and filter guide.

$10.52

Thermistor,NTC

$3.06

Sensor

$4.59

Thermostat

$22.86

Poly-V Drive Belt

$10.52

Thermostat

$20.07

Cover,Guide

$8.18

Thermostat Assembly

$40.29

Gas Igniter

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Gas Dryer not getting hot

  • Customer: Terry from Goose Creek SC
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 8 of 10 people found this instruction helpful
I noticed the flame would start, then quit after about 15 seconds. I checked the flame detector, and found the lenze cracked. I replaced it, and it's as good as gold.

It looked like a hard job to take the drum out to get at the part. But the top was off with 3 screws, the front about 6 I think. Then the front frame, only 4 screws. I think sett... read more

Shutting off a while after starting. Burning smell.

  • Customer: Dennisd from Waco TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Seemed to be shutting off on the safety thermostat so I replaced them all. Works. read more

I broke the igniter while adapting from Natural gas to LPG

  • Customer: Nathan from Mount Vernon WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
This was a repair from a repair. It started as a conversion to LPG, in the process the igniter broke. The parts arrived quickly and we were able to get it back together and the wife is happy. Thanks. read more