Models > 79679478000

79679478000 Kenmore Dryer - Overview

Get Parts and Repair Help for 79679478000

If you know the dryer repair part you need, you can browse the list of all parts on the 79679478000, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$23.70

Drum Support Roller

This part is used to hold the drum in place in the cabinet while letting the drum rotate on the support rollers. It is recommended that you replace both rollers at once. Sold Indiv...

Order within the next 5 hrs and your part ships today!
$3.09

Sensor

Order within the next 5 hrs and your part ships today!
$10.52

Thermistor,NTC

Order within the next 5 hrs and your part ships today!
$4.61

Thermostat

Order within the next 5 hrs and your part ships today!
$22.89

Poly-V Drive Belt

This belt helps rotate from the drive motor to the drum.

Order within the next 5 hrs and your part ships today!
$12.91

Filter Assembly,Lint

Order within the next 5 hrs and your part ships today!
$10.52

Thermostat

Order within the next 5 hrs and your part ships today!
$1.96

Clamp

Order within the next 5 hrs and your part ships today!
$8.18

Thermostat Assembly

Order within the next 5 hrs and your part ships today!
$51.39

Gas Igniter

Comes with bracket and wire harness.

Order within the next 5 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

I broke the igniter while adapting from Natural gas to LPG

  • Customer: Nathan from Mount Vernon WA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
This was a repair from a repair. It started as a conversion to LPG, in the process the igniter broke. The parts arrived quickly and we were able to get it back together and the wife is happy. Thanks. read more

Broke igniter replacing thermostats

  • Customer: Jeff from Ogden UT
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Unplugged dryer. Removed front panel. removed nut holding old igniter. Unplugged old igniter, plugged in new igniter, and mounted new igniter with screw using nut driver. read more

dryer had lent fire and didn't have heat in the dry cycLe.

  • Customer: Lorinda from DeWitt MI
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
After replacing the wires and the heat thermostat I realze that I needed to replace the thermostat ntc and the thermostat to blower located under door was burnt during fire. I removed front panel,front facing and tumbler to reach thermostat inter wall. It was easy after fixing to other area prior. I thought it was very easy and didn't cosume much time. I'm a... read more