Models > 79629272000

79629272000 Kenmore Washer - Overview

Get Parts and Repair Help for 79629272000

If you know the washer repair part you need, you can browse the list of all parts on the 79629272000, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$22.58

Sensor Assembly

Order within the next 10 hrs and your part ships today!
$8.18

Cap,Pulsator

Order within the next 10 hrs and your part ships today!
$81.29

PULSATOR ASSEMBLY

Order within the next 10 hrs and your part ships today!
$53.73

Water Inlet Valve Assembly

Order within the next 10 hrs and your part ships today!
$8.18

HOSE ASSEMBLY,DRAIN

Order within the next 10 hrs and your part ships today!
$1.98

Screw,Customized

Order within the next 10 hrs and your part ships today!
$20.07

Inlet Hose

Also known as the water supply hose.

Order within the next 10 hrs and your part ships today!
$15.41

Switch Assembly,Sensor

Order within the next 10 hrs and your part ships today!
$1.98

Washer,Common

Order within the next 10 hrs and your part ships today!
$188.68

HOUSING ASSEMBLY,CLUTCH

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Humming, no error code, not spinning

  • Customer: Brian from Camden MO
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
The problem ended up being the pump motor which discharges water from the washer. I figured out this was the problem after trying several things. I determined the motor was fine when it was empty. With the unit turned off, if you can rotate the tube with a quick spin and it lights up, probably this is OK. Then I tried to run it again and it went about 1/2 wa... read more

Three of the four pivot hangers broke while the washer was spinning.

  • Customer: Charles from Millington TN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Once i got the parts I removed the top so I could get to the hangers. I removed the broken parts and replaced them with the replacement parts and rehung the tub and replaced the top. read more

Washer pulsator was coming loose during wash cycle.

  • Customer: Kristen from Safford AZ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Since the old pulsator had actually come off during a wash cycle, I was able to place the new one on easily. Tightened the screw with a socket. Then placed the new cap on. Before placing the new pulsator on, I was able to clean all the mold and hard deposits off the mechanism under the pulsator. The hard deposits were also scrapped from the pulsator holding... read more