Models > 79579783901

79579783901 Kenmore Freezer - Overview

Get Parts and Repair Help for 79579783901

If you know the freezer repair part you need, you can browse the list of all parts on the 79579783901, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$6.34

Switch,Push Button

$1.96

Cam,Shaft

$1.96

Cam,Shaft

$1.98

Spring,Lever

$126.57

Ice Maker Assembly

The wire harness is not available separately.

$62.66

Valve Assembly,Water

$20.11

Shelf,Glass

$40.29

Gasket Assembly,Door

$40.29

Gasket Assembly,Door

$10.52

CONNECTOR,TUBE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Pump for ice maker leaked.

  • Customer: Thomas from Orlando FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Wrench set
  • 0 of 0 people found this instruction helpful
Easy repair. Unplugged refer. Took back cover off with screwdriver. Unscrewed the support for the pump. Unhooked water lines from both ends of bad pump. Pulled electrical line off the old pump. Put the support on the new pump, hooked up lines, and electrical plug and screwed the pump to the frame. Put the coever back on unit. Plugged back into wall. ... read more

Frost in the freezer. Icemaker frozen.

  • Customer: Teresa from Miami FL
  • Difficulty: Really easy
  • Time to Complete: More than 2 hours
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I called LG and followed the instructions given over the phone. The instructions couldn't have been simpler. Disconnect the appliance for several hours and then connect again. I disconnected the appliance overnight, cleaned out the freezer, and reconnected it. Problem solved. Did not need to call a repairman and did not use the clips. read more

Unit kept beeping as if the freezer door was open

  • Customer: Paul from San Jose CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 0 of 0 people found this instruction helpful
I popped the old switch out of place and then disconnected the wire harness from the switch with a pair of needle nose pliers. I then inserted the harness into the new switch and popped the switch into place. Super easy and fast. read more