The interior light in your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, or stays on when the door is closed...
This lower holder cover is also known as a toe grille clip, or a kickplate clip. It is designed for use with refrigerators. The main purpose of this part is to hold the molding at the base of your ref...
This part is a replacement light socket for your refrigerator. This model is white in color, and it has two sockets that will fit two separate light bulbs. The light socket connects to the power sourc...
This ice maker assembly is a genuine OEM replacement unit for LG refrigerators. It is responsible for producing and dispensing ice cubes. You can find the ice maker assembly inside the freezer compart...
This part is a temperature sensing devise. It senses the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted. It is calibrated to permit...
$39.76
In Stock
Questions And Answers for 79575004401
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patrick
21 days ago
I just asked this question but I noticed the answer was for a different model kenmore than we have. Ours is model no. 795.75004401 and was made in 2005. Basically the freezer is working fine, but the fridge part is not cooling. The coils appear to be relatively dust free and the fan and compressor seem to be working fine. What's the likely part that needs to be replaced and please, some help figuring out where the part is on the fridge?
Thanks,
For model number 79575004401
Hello Patrick, thank you for getting in touch. According to our research, the issue is most probably with the fresh food section temperature sensor, part number PS3529165. It senses the temperature inside the refrigerator and sends information to the electronic control. It is located under a cover on the wall toward the front of your appliance approximately in the middle portion. You may need to replace it to fix the issue. We hope this solves your problem!
Hi Kathy,
Thank you for your question. The part number listed under your model number for the drip tray is PS3518788. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Have had the Sears repairman come to the house to replace this part in 5 minutes for +$100.. twice. When my dad's stopped working, ordered the part and replaced it myself for the cost of the part and shipping. Use a screw driver to pry the right side of the switch and pull out. Best to watch a youtube video first. Takes about 5 minut
... Read morees.
