Models > 79558819901

79558819901 Kenmore Refrigerator - Overview

Get Parts and Repair Help for 79558819901

If you know the refrigerator repair part you need, you can browse the list of all parts on the 79558819901, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$1.98

Spring,Lever

$6.34

Switch,Push Button

$3.05

Tray,Ice

$91.27

Water Valve Assembly

When energized this part releases water from the supply line into the ice mold.

$40.25

MOTOR,DC

$16.79

Lamp,Incandescent

$7.43

GUIDE,RAIL

$18.14

Connector,Tube

$112.84

Ice Maker Assembly

$8.18

Tube,Inlet

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

interior lights stay on

  • Customer: Rich from Pequannock NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Changed door switch. Repair worked for a few days but re-occured. Possibly the other switch is bad . read more

My ice maker overflowed water and made a mess in the freezer

  • Customer: steve from clarence center NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The part was extremely easy to replace. The unit came out with one screw, and I had to unplug the wire connection. After removing I noticed the ice tray was cracked - that's what caused the problem. The new unit went in easily with 1 plug in connection and 1 screw. I was done in less than 10 minutes. read more

Rails broke when overloaded

  • Customer: James from Bremerton WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed shelf that rails were mounted to. Used a std phillips screwdriver to loosen screws attaching the rails, three per side. Removed damaged rails, lined up new rails and tightened screws. Returned shelf to refrigerator and inserted tray on the new rails. read more