Models > 79095683303

79095683303 Kenmore Range - Overview

Get Parts and Repair Help for 79095683303

If you know the range repair part you need, you can browse the list of all parts on the 79095683303, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 79095683303 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Temperature Probe

Note: Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.


Light Bulb Lens

This lens covers the interior oven light bulb.


Light Bulb

This 40 watt appliance light bulb are used for some ranges, refrigerators, and microwaves. They are sold individually.


Inner Oven Door Glass

This is also called the heat barrier glass.


Foot Leveling Leg

Sold Individually. These legs should be adjusted to make your appliance level on uneven flooring.


Steel Washer

Size: 3/4 inch od x 1/4 inch id


Broil Element

This broil element is found on the roof of the oven.


Oven Light Socket



Sold Individually.


Leveling Leg

Sold Individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Loud pop, circuit breaker tripped.

  • Customer: Vic from Yankton SD
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 49 of 60 people found this instruction helpful
Pulled stove out. Removed screws(5) holding top unit. Tipped top unit to get at the control panel. Removed screws holding control panel. Removed wires from old one and put on to the new one. Reinstalled top panel and turn breaker back on.PS I didn't order a new face panel so had to gentley remove from the old and put on the new panel(before reinstalling). ... read more

Range would not come on

  • Customer: MaryLou from Monroe NC
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 72 of 132 people found this instruction helpful
Turned off power, took back off stove removed old probe.
I had to splice wires since new probe ends did not match up.
the instructions were to splice the wires. I had the breaker off for about 3 hours. this is not in the instructions, but being a widow, I had to ask a few people why it would not come on after I connected the wires.
After waiti... read more

Cracked oven door inner glass

  • Customer: Mitch from Fernandina Beach FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 37 of 55 people found this instruction helpful
Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door from the inside. The... read more