Models
>
74405
74405 - Overview
Models starting with 74405
Click on the best match to narrow your results.
Exact Part matches for your search term
[Viewing 2 of 2]
Pressure washer degreaser solution
This part number matches the current model number 74405
PartSelect #: PS16870173
Manufacturer #: 74405
No Longer Available
Orifice n
This part number matches the current model number 74405
PartSelect #: PS16994616
Manufacturer #: 74405
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Handle Screw
PartSelect #: PS8752913
Manufacturer #: MJB63190001
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
$9.35
In Stock
FILTER ASSEMBLY,AIR CLEANER
PartSelect #: PS16222687
Manufacturer #: ADQ73214408
Refrigerator Air Filters are a key component for neutralizing odors and ensuring a fresh stream of air into your refrigerator. Swapping your old filter out for a fresh one isn’t difficult and should t...
$48.61
In Stock
Switch,Micro
PartSelect #: PS3529276
Manufacturer #: 6600JB3001C
This is a micro switch for various models of LG refrigerators. This switch is responsible for turning the ice dispenser on and off within the freezer compartment of the fridge. If this switch is damag...
$33.52
In Stock
Clip
PartSelect #: PS3522801
Manufacturer #: 4004JA3002A
This water tubing clip holds the water fill tube in place in your refrigerator. The water fill tube attaches and supplies water to the ice maker/water dispenser in your fridge-freezer. If the tubing i...
$16.75
In Stock
Refrigerator Ice Container Assembly
PartSelect #: PS11709701
Manufacturer #: AKC73369908
$187.84
In Stock
Common Symptoms of models starting with 74405
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Icemaker quit releasing ice from tray and water was pouring and freezing in ice storage bin
This couldn't have been easier. Two tiny screws in the front needed unscrewed, and then two plastic clips in the middle just had to be popped lose. Finally, you unplugged the power cord. Then, you just needed to reverse the process by plugging the new ice maker in, popping the clips in place, and screwing the two holes back in and turning
... Read more
the whole thing on. Voila! Perfect ice cubes again. And for only a little over $100.
Read less
Parts Used:
-
Amber from PEORIA, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
8 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice chute would not open.
Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.
Parts Used:
-
Steve from MUKWONAGO, WI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
12 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grandson lost the ignition key to my Toro!
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Parts Used:
-
Michelle from AYLETT, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
8 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!