Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 72180599401

72180599401 Kenmore Microwave - Overview

Get Parts and Repair Help for 72180599401

If you know the microwave repair part you need, you can browse the list of all parts on the 72180599401, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$15.24

Filter,Grease

This is a grease filter manufactured for a microwave. The microwave grease filter filters the exhaust air and traps any grease flowing out of the appliance. It is important to keep...

Order within the next 41 mins and your part ships today!
$4.27

Light Bulb - 125V 30W

This is a light bulb and it is a part for your microwave. This bulb uses 30 watts, operates on 125 volts, and is an incandescent lamp. The function of this bulb is to illuminate the surface underneath and inside of your appliance while the door is open, and during a cooking cycle. You will need to replace this part if your door is open and the light is not activated. We recommend that you unplug your microwave and leave it inactive for some time before making this repair. Proceed with caution as the capacitors in a microwave can hold dangerous electrical charges for long periods of time even when the appliance has been unplugged.

Order within the next 41 mins and your part ships today!
$5.72

Switch,Micro

This microwave door switch provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. This door sw...

Order within the next 41 mins and your part ships today!
$5.72

Bracket,Idle

Order within the next 41 mins and your part ships today!
$5.24

Fuse,Time Delay

The fuse-time delay may also be known as a line fuse or a microwave fuse, and it is a piece for your microwave. The function of this part is to shut off the microwave if there is a...

Order within the next 41 mins and your part ships today!
$14.94

Door Handle - Black

Screws NOT included.

Order within the next 41 mins and your part ships today!
$5.72

Switch,Micro

This is a micro switch, but you may also know it as a door switch and it is compatible with your microwave. The function of the micro switch is to communicate to the electronic con...

Order within the next 41 mins and your part ships today!
$4.27

Screw,Tapping

Order within the next 41 mins and your part ships today!
$110.91

Magnetron

Order within the next 41 mins and your part ships today!
$14.94

Filter,AC Line

Order within the next 41 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave failed to head and light, fan, and turntable failed to come on.

  • Customer: Robert from Cedar Park, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws. read more

Microwave operated but did not heat

  • Customer: Donald from Oak Ridge, TN
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Initial failure of over range microwave Aug 3rd. Control Panel worked but no heat. Took to local LG authoriaed local repair place. They fixed it quickly and we re-installed it. Worked fine for 2 months then had similar failure again. Agaim took to same authorized repairer. They kept unit for 3 months but finally concluded theu could not fix it and suggeste... read more

suddenly stopped working while in use

  • Customer: Kevin from Colonia, NJ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
i unplugged the unit,unscrewed the outer shell so that all the wiring and internal components were visible.starting at the first of three micro switches i removed the slip on terminals installed the alligator clips too the wires so the switch would now be bypassed.i made sure the wires and clips were not touching anything plugged unit in and it worked.i then... read more