Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 72180593401

72180593401 Kenmore Microwave - Overview

Get Parts and Repair Help for 72180593401

If you know the microwave repair part you need, you can browse the list of all parts on the 72180593401, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.60

Filter,Grease

This is a grease filter manufactured for a microwave. The microwave grease filter filters the exhaust air and traps any grease flowing out of the appliance. It is important to keep...

Order within the next 5 hrs and your part ships today!
$5.12

Light Bulb - 125V 30W

This is a light bulb and it is a part for your microwave. This bulb uses 30 watts, operates on 125 volts, and is an incandescent lamp. The function of this bulb is to illuminate the surface underneath and inside of your appliance while the door is open, and during a cooking cycle. You will need to replace this part if your door is open and the light is not activated. We recommend that you unplug your microwave and leave it inactive for some time before making this repair. Proceed with caution as the capacitors in a microwave can hold dangerous electrical charges for long periods of time even when the appliance has been unplugged.

Order within the next 5 hrs and your part ships today!
$5.72

Switch,Micro

This micro-switch is designed for use in your microwave. The function of this part is to monitor the door latch position and communicate to the electronic control board whether the...

Order within the next 5 hrs and your part ships today!
$5.72

Switch,Micro

This microwave door switch provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. This door switch is approximately 1 1/2 inches long, and has 2 metal prongs called terminals that extend from its body. If your microwave will not turn or heat properly, there could be an issue with the door switch. You can check the switch for continuity using a multi-meter. With the actuator button depressed, you should see continuity between these terminals. If there is no continuity the switch will need to be replaced. NOTE: Before you begin this repair, first make sure your microwave is unplugged, and that your capacitor is discharged. A capacitor stores large amounts of electricity even when your microwave is unplugged.

Order within the next 5 hrs and your part ships today!
$8.60

Filter,Charcoal

Order within the next 5 hrs and your part ships today!
$6.84

Shaft,Turntable

Order within the next 5 hrs and your part ships today!
$5.72

Bracket,Idle

Order within the next 5 hrs and your part ships today!
$5.12

Damper

Order within the next 5 hrs and your part ships today!
$15.19

Holder Assembly,Locker

Order within the next 5 hrs and your part ships today!
$4.88

Fuse,Time Delay

Order within the next 5 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Shaft socket was worn out

  • Customer: Cesar from Miami, FL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Pop old one out and replaced it with new one. read more

Microwave failed to head and light, fan, and turntable failed to come on.

  • Customer: Robert from Cedar Park, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws. read more

suddenly stopped working while in use

  • Customer: Kevin from Colonia, NJ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
i unplugged the unit,unscrewed the outer shell so that all the wiring and internal components were visible.starting at the first of three micro switches i removed the slip on terminals installed the alligator clips too the wires so the switch would now be bypassed.i made sure the wires and clips were not touching anything plugged unit in and it worked.i then... read more