Models > 72169113900

72169113900 Kenmore Microwave - Overview

Get Parts and Repair Help for 72169113900

If you know the microwave repair part you need, you can browse the list of all parts on the 72169113900, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.06

Switch,Micro

$12.93

Motor, AC Synchronous

$4.59

Turntable Assembly

$1.96

Screw,Tapping

$10.52

Tray,Glass

$1.96

Spring

$3.06

Switch,Micro

$62.66

Magnetron

$1.96

Fuse,Time Delay

$20.11

Capacitor,High Voltage

Common Symptoms of the 72169113900 [Viewing 1 of 54]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

MOTOR BURNED OUT ON TURNTABLE

  • Customer: Steven from Oak Forest IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 19 of 26 people found this instruction helpful
My 8 year old daughter cleaned the inside of the microwave with enough water to rival a Tsunami. Resulted in a clean microwave with a fried out motor that no longer revolved. Part came quickly. Took cover and bottom off to get to the part. One screw held it on and a plug. Removed those, put on new part and she was good to go. No trip to Home Depot today. read more

The tray did not turn

  • Customer: Charlie from Tulsa OK
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 7 people found this instruction helpful
It's easy , just pull the old one up and put the new one push it down read more

Microwave failed to head and light, fan, and turntable failed to come on.

  • Customer: Robert from Cedar Park TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Problem was due to a faulty door switch. Replaced with a new switch and the microwave now works fine! Only thing that was tricky was that LG uses the hex screws with a peg in the middle to keep the microwave cover on. Had to use a small screwdriver and pliers (on the screwdriver) to unscrew the screws. read more