Models > 72166229500

72166229500 Kenmore Microwave - Overview

Get Parts and Repair Help for 72166229500

If you know the microwave repair part you need, you can browse the list of all parts on the 72166229500, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.61

Turntable Assembly

$1.96

Fuse,Time Delay

$10.52

Glass Cooking Tray

This tray rotates in your microwave ensuring more even temperatures.

$74.68

Magnetron

$1.96

Damper

$3.12

SWITCH,MICRO

$1.98

Screw,Tapping

$4.61

Thermostat

$1.96

Locker

$1.96

Cover,Resin

Common Symptoms of the 72166229500 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave turntable did not turn, or dragged/stuck

  • Customer: Richard from Duluth GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I had previously replaced the turntable motor, which helped for a small while. When the problem occurred again I examined the turntable assembly (small wheels which support the glass tray as it turns). The wheels were all flat on two sides. It may have been a defect from the beginning or a result of our placing food off-center because this model has a terrib... read more

My turntable shattered

  • Customer: Terry from New York NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Partselect sent me the right thing in two days! The whole process was easy as pie. read more

no heat

  • Customer: Nelia from Streamwood IL
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
unplug the unit then pull down , lot of screws are on top. open the cover . you could see the parts that need to replace on the right hand side (heavy side). disconnect wires then test the parts that need to replace by a tester to make sure that it's really broke .then unscrew part and replace . read more